Skip to content
Saved
RELEASED 2023.04REASSESSED 2026.08.07
Ecovacs

Ecovacs Goat G1

TrueMapping fuses 360 degree LiDAR, front time-of-flight sensors and UWB beacon positioning, with AIVI 3D obstacle avoidance on the camera, so boundaries are set without wire. Ecovacs rates the G1 for 1,600 m2 of working area, about 17,200 sq ft or 0.4 acre, at 600 m2 a day. Two beacons and two navigation-assist poles ship in the box.

Ecovacs Goat G1
Price$2,199 list priceRetail price not tracked
FIT CHECK

Will the Ecovacs Goat G1 work on your yard?

Describe your yard using the controls. Each choice reads the spec sheet for you, flagging where the Ecovacs Goat G1 is built for your space and where it isn’t.

Yard size

Terrain

Grass type

Boundary setup

A classification of fit for the conditions you set, not a recommendation. Verdicts describe engineering design intent, not test results.

SPECIFICATION

The full spec sheet.

Priced above the category median, with every figure charted against the category below.

25.6 in17 in16.5 inDimensional drawing
Key specificationsManufacturer-published
Footprint
17 × 25.6 in · 16.5 in tall
Weight
51.6 lbs
Battery
144 Wh · Li-ion
Wi-Fi
Supported
Cutting width
8.7 in
Cutting height range
1.2-2.4 in
Max area
17,200 sq ft
Max slope
45%
Mapping & navigation

TrueMapping: 360° LiDAR and front ToF sensing fused with UWB beacons; AIVI 3D camera obstacle avoidance

Where it lands · ranked across 128 robot lawn mowersThis robotMedianTypical range
Price$2,199
$549$5,999
Near median
Noise59dB

50 dB82 dB
Near median
Charge time120min

30 min300 min
Near median
Weight51.6lbs

13 lbs134 lbs
Above median

Position shows where the figure sits across the tracked category, not a quality judgment.

Official referencesProduct page
OWNERSHIP

Living with it.

UWB positioning stable in clear yards; three years of firmware iteration validated. Metal-structure yards show occasional jitter.

Two years of owner forum data document solid performance across diverse climates and yard types. Early firmware addressed positioning drift; current versions (2.4+) show consistent behavior. No major recalls or systemic failures; firmware updates addressed edge cases, not fundamental flaws.

Owner effort~55 minhands-on per month
Consumables$130replaceable parts / yr
Reliability trend Stableowner-reported arc
What goes wrong · 4 documented · 1 self-recover
Common
Blade dulling on dense grassRagged cuts, higher motor load, slower mowing speed
Owner fixBlade replacement every 5-7 weeks; cost ~$70 per blade. High-wear yards require more frequent swaps.
Occasional
UWB positioning jitter near metalNavigation drifts 20-30 cm off intended path in electromagnetically noisy zones
Self-recoversReposition beacon away from metal structures or power lines. Jitter is location-specific, not a mower defect.
Occasional
Beacon battery depletionUWB signal lost; mower reverts to GPS or manual docking
Owner fixReplace beacon batteries annually (~$20 for two AAA batteries). Battery check before spring operation critical.
Occasional
Charging dock contact corrosionIntermittent charging; reduced battery capacity on next session
Owner fixClean dock contacts weekly; replace rubber seals every two years to prevent corrosion.
Upkeep routine
Weekly52×/yr
Charging dock contact inspection and cleaning to prevent corrosion-related charge failures.
Monthly12×/yr
Undercarriage inspection for grass clipping buildup; blow out with compressed air.
Seasonal4×/yr
Replace the beacon dry cells, six in total, when the app reports them low. Indoor storage in freezing climates with the mower's pack left charged rather than run down; inspect mower and dock before winter storage.
As neededno fixed schedule
Replace the stamped blades as a set once edges are dull or chipped. A spare blade kit ships with the mower and replacements are sold in multi-packs. Replace rather than sharpen: grinding thins the steel and unbalances the disc on a machine that runs unattended. · Clean the LiDAR and time-of-flight sensor windows when they collect dust or clippings. The system is IPX6 rated; no annual resealing or hardware replacement is called for.
Cost over time · past the sticker
PurchaseRunning cost
Year 1
$2,329
Year 3

$2,589
Year 5

$2,849

$2,199 to buy, then about $130 a year for the replaceable parts below. Over three years that is roughly $390 past the sticker price. Excludes electricity and any repairs.

What you replace
  • BladesBlade changes

Replacement cadence from the maintenance schedule; prices shown where the source documents them.

Safety notes

CautionExposed spinning blades beneath chassis: Blade housings are not guarded. Never place hands or feet beneath the mower during operation.

NoteBeacon positioning hazard if buried incorrectly: UWB beacons should be placed on the surface or on stake mounts. Burying or submerging beacons degrades signal propagation and positioning accuracy.

RECORD

How the assessment has moved.

Every announcement, release and reassessment behind the current classification.

Coming soon
Just launched
Active updates
Settled
Discontinued
  1. Aug 2026 · AssessmentRobovations Score revised 73 → 71
  2. Aug 2026 · AssessmentRobovations Score rescored under v4.2: 70 → 73
  3. Jul 2026 · AssessmentPrivacy 72 → 65, Reliability 74 → 78, 2 other dimensions · overall held at 70
  4. Jul 2026 · AssessmentRobovations Score recorded at 70 of 100
Editorial comparisons

How Ecovacs Goat G1 compares.

All comparisons →
Common questions

What people actually ask.

5 answered
OperationWhat is UWB positioning and how does it work alongside the G1's other sensors?
UWB (Ultra-Wideband) uses radio beacons placed in the yard to triangulate the mower’s position, and two ship with the machine. On the G1 it is one input to TrueMapping, which fuses it with 360 degree LiDAR and front time-of-flight sensing; obstacles are handled separately by AIVI 3D on the camera. Unlike satellite positioning, UWB does not depend on sky view, and unlike a camera it does not depend on light. Ecovacs publishes no pass-to-pass accuracy figure.
OperationHow many beacons does the Goat G1 need and where should they be placed?
Two beacons and two navigation-assist poles ship with the mower; there is no single-beacon starting configuration to expand from. Placement still matters, with corners or edges of the mowing zone the usual positions, and the app walks through it during setup. Because the G1 fuses beacon data with LiDAR and time-of-flight sensing under TrueMapping, beacon geometry is one input rather than the whole navigation picture.
OperationDoes the Goat G1 work in rain or heavy cloud cover?
Positioning does not depend on light: UWB and LiDAR both work in the dark and under cloud. The camera side is a separate question, and Ecovacs publishes no figures for AIVI 3D obstacle detection in rain or low light. Ecovacs markets the G1 on wire-free boundaries, TrueMapping and 3D obstacle avoidance rather than on weather immunity.
OperationCan the Goat G1 handle steep slopes like the Lymow One?
No. Goat G1 is rated to roughly 20 degrees; steeper slopes see occasional traction loss. Wheeled suspension (not tracked) limits capability. Slopes above 20 degrees recommend wire-guided mowers or human operation.
OwnershipWhat is the Goat G1's runtime and coverage area per charge?
Ecovacs does not publish a runtime figure for the G1. What it does publish is a 5,200 mAh pack, 600 m2 mowed per day, about 6,460 sq ft, and a 1,600 m2 total working area, about 17,200 sq ft. The mower docks, recharges and resumes on its own, so the daily rate is the number that describes a job rather than minutes per charge.

Cite / Embed

Reference the Ecovacs Goat G1 classification.

Embed the Autonomy Ladder™ mark or copy the citation. The mark is served from this record, so a reassessment updates it on your page automatically.

Get the embed code and citation
124161
268112
Clear space 3222 on all sides
Embed code

Scale proportionally only, up to 2× (536px wide)(224px wide). No recolouring, cropping, rotating, or re-typesetting.

Citation

Robovations. "Ecovacs Goat G1: Autonomy Level III (Conditional Autonomy)." Autonomy Ladder™, assessed August 2026. https://robovations.com/robots/ecovacs-goat-g1/

  • Link it. The mark must point at this record. An unlinked mark is not authorised.
  • Hot-link it. Never download, self-host, or re-upload the image. A saved copy stops updating, and a mark that has stopped updating is a claim we no longer stand behind.
  • A classification, not an endorsement. It may not appear beside language implying Robovations recommends, rates, or approves the product.
Where to next

Three ways to keep going.

For browsers

See every Level III.

Every robot we’ve classified at conditional autonomy. Sorted by readiness, score, and price. Filter by category, manufacturer, or release date.

Updated weekly with new entries and reclassifications.