Samsung Jet Bot AI+
Level III vacuum combining LiDAR mapping and AI obstacle detection for autonomous operation in known indoor environments. Strong integration with SmartThings ecosystem, limited by weekly maintenance demands.
List price
$1,299
Released 2021.06Reassessed 2026.09.02
Will the Samsung Jet Bot AI+ work in your home?
Describe your home using the controls. Each choice reads the spec sheet for you, flagging where the Samsung Jet Bot AI+ is built for your space and where it isn’t.
A classification of fit for the conditions you set, not a recommendation. Verdicts describe engineering design intent, not test results.
Living with it.
Stable navigation and docking across firmware revisions; object detection false positives addressed through updates.
↗ Improvingowner-reported arc
Consistent navigation and docking reliability confirmed after 2 years. Initial object detection false positives resolved via 2022-2023 firmware. Brush wear and filter clogging typical maintenance for established units.
The independent record is still forming. Failure modes are listed once an outside source reports them.
Check dock contact pins for dust buildup to ensure consistent docking alignment and charging.
Remove and detangle hair wrap, inspect for cords or debris that impeded the cleaning cycle.
Replace or wash bristles if bent, rinse under water and air-dry overnight before reinstalling.
Update the SmartThings app and robot firmware for object recognition improvements and bug fixes.
Replace main only if visible wear reduces suction; inspect the Clean Station air path and dock contacts.
Replace the Clean Station . The 2.5 L bag is sealed and is replaced, not emptied.Typical for robot vacuums: every 3-6 months
Re-establish WiFi connection if geofencing fails, manually adjust no-go zones if furniture rearrangement affects coverage.
$1,299 to buy, then about $32 a year for the replaceable parts below. Over three years that is roughly $96 past the sticker price. Excludes electricity and any repairs.
- Typical for robot vacuums: every 3-6 monthsWhere to buy Dust bag
- Typical for robot vacuums: every 3-6 months
- Typical for robot vacuums: annually
- Typical for robot vacuums: every 3-6 months
Replacement cadence from the maintenance schedule; prices shown where the source documents them. Some links earn Robovations a commission. It does not change any classification.
-
CautionObject detection may misidentify floor edgesUse tape markers on stairs to prevent edge detection errors.
-
Brush entanglement risk with loose hairPause if tangling detected to avoid motor wear.
The full spec sheet.
Priced above the category median, with every figure charted against the category below.
- FootprintThe width, depth and height of the robot itself, without its dock.
- 13.5 in dia, 3.9 in tall
- WeightThe robot alone, without its dock, as the maker states it.
- 9.6 lbs
- BatteryStored energy in watt-hours; a larger pack runs longer, not harder.
- 60 Wh · Li-ion
- Wi-FiThe bands the robot can join; many models need a 2.4 GHz network to set up.
- 2.4 + 5 GHz
- Onboard dustbinThe bin inside the robot; an auto-empty dock moves its contents into a bag.
- 200 mL•
- Dust bagA bag inside the dock that the dock empties the robot's bin into; you replace the bag.
- 2.5 L
- DockWhat the base does besides charging: empty the bin, wash and dry pads, refill water.
- Auto-empty
LiDAR + AI obstacle avoidance with object recognition for cords, toys, and hazards
Position shows where the figure sits across the tracked category, not a quality judgment.
How the assessment has moved.
Every announcement, release and reassessment behind the current classification.
-
Aug 2026 · AssessmentRobovations Score rescored under v4.2: 71 → 68
-
Jul 2026 · AssessmentMaintenance 80 → 50, Reliability 70 → 84, 3 other dimensions · overall held at 71
-
Mar 2026 · AssessmentRobovations Score recorded at 71 of 100
-
Jun 2021 · ReleaseLaunches commercially in the United States
What people actually ask.
OperationDoes the Jet Bot AI+ work without SmartThings?
OwnershipHow often does the brush require cleaning?
OperationDoes LiDAR work in sunlit rooms?
OperationWhat can the camera see, and where does the video go?
CompatibilityWhat happens if WiFi drops during cleaning?
OperationCan it map multiple floors independently?
Where it's sold
Some links earn Robovations a commission. It does not change any classification. Affiliate disclosure.
We are no longer finding a current new-stock listing for this robot. Remaining offers may be used, refurbished, or third-party — confirm the condition and price on the retailer’s page before buying.
Reference the Samsung Jet Bot AI+ classification.
Embed the Autonomy Ladder™ mark or copy the citation. The mark is served from this record, so a reassessment updates it on your page automatically.
Get the embed code and citation
Scale proportionally only, up to 2× (536px wide)(224px wide). No recoloring, cropping, rotating, or re-typesetting.
Robovations. "Samsung Jet Bot AI+: Autonomy Level III (Conditional Autonomy)." Autonomy Ladder™, assessed September 2026. https://robovations.com/robots/samsung-jet-bot-ai-robot-vacuum-with-object-recognition/
- Link it. The mark must point at this record. An unlinked mark is not authorized.
- Hot-link it. Never download, self-host, or re-upload the image. A saved copy stops updating, and a mark that has stopped updating is a claim we no longer stand behind.
- A classification, not an endorsement. It may not appear beside language implying Robovations recommends, rates, or approves the product.












