Skip to content
Saved
RELEASED 2024.05REASSESSED 2026.08.06
Ecovacs

Ecovacs Deebot T30 Pro Omni

A Level III vacuum-mop with dock-automated mop maintenance, built for multi-room schedules. TruEdge adaptive edge mopping, where one rotating pad extends to reach baseboards and corners, is what separates this model from the rest of the Deebot line. Value flows to owners embracing hands-off dock automation.

Ecovacs Deebot T30 Pro Omni
FIT CHECK

Will the Ecovacs Deebot T30 Pro Omni work in your home?

Describe your home using the controls. Each choice reads the spec sheet for you, flagging where the Ecovacs Deebot T30 Pro Omni is built for your space and where it isn’t.

Home size

Primary floors

Mopping needs

You want to…

A classification of fit for the conditions you set, not a recommendation. Verdicts describe engineering design intent, not test results.

SPECIFICATION

The full spec sheet.

Priced above the category median, with every figure charted against the category below.

13.8 in diaTOP4.1 inSIDEDimensional drawing
Key specificationsManufacturer-published
Footprint
13.8 in dia · 4.1 in tall
Weight
9 lbs
Wi-Fi
2.4 GHz only
Voice
Alexa, Google Home
Mapping & navigation

LiDAR + camera + AI obstacle avoidance + edge detection

Where it lands · ranked across 205 robot vacuumsThis robotMedianTypical range
Suction11,000Pamode not stated
1,000 Pa36,000 Pa
Near median
Runtime290min
60 min360 min
Above median
Price$999
$120$2,000
Near median
Noise65dB
43 dB80 dB
Near median
Charge time186min
90 min420 min
Near median
Weight9lbs
3.6 lbs25 lbs
Near median

Position shows where the figure sits across the tracked category, not a quality judgment. Suction in Pascals has no standard test method, and the published figure is a peak-mode claim, so it is comparable only within a brand and generation.

OWNERSHIP

Living with it.

Recent launch shows stable performance for non-early-production units; LiDAR map resets and dock wash errors are occasional quirks.

LiDAR mapping corruption most common early issue, typically after firmware updates but resolved by full map reset. Ecovacs firmware patches address navigation stability. Stable suction and brush performance confirmed across multi-month use.

Owner effort~2 hrshands-on per month
Consumables$120replaceable parts / yr
Reliability trend Stableowner-reported arc
What goes wrong · 3 documented · 0 self-recover
Occasional
Dock wash cycle failure E007Hot-water wash fails when tank low or inlet blocked, most common dock error
Owner fixRefill water tank to restore function
Occasional
Map corruption after firmware updateLiDAR map becomes inconsistent, robot navigates to wrong rooms
Owner fixDelete and re-run full mapping via app
Rare
Mop pad detection errorDock fails to recognize pad presence and blocks cleaning cycle
Owner fixCheck pad alignment or replace worn pads
Upkeep routine
Weekly52×/yr
Empty dustbin and mop water tank; refill clean water tank ($0).
Monthly12×/yr
Swap mop pads; clean dock water filter ($15-25 per pair pads). · Rinse vacuum dustbin filter; replace when clogged ($0).
Seasonal4×/yr
Replace vacuum motor filter and side brush ($20-40 total per Ecovacs pricing). · Clean LiDAR window and camera lenses; inspect cliff sensors for dust accumulation ($0).
Yearly1×/yr
Inspect dock brush and replace if bristles are flattened; clean dock jets ($0 unless replacement brush ordered).
Cost over time · past the sticker
PurchaseRunning cost
Year 1
$1,119
Year 3
$1,359
Year 5
$1,599

$999 to buy, then about $120 a year for the replaceable parts below. Over three years that is roughly $360 past the sticker price. Excludes electricity and any repairs.

What you replace
  • Filter
  • Brush

Replacement cadence from the maintenance schedule; prices shown where the source documents them.

Safety notes

NoteCliff sensors prevent stair falls: Stops immediately and reverses on stairs per manufacturer specification

NoteWater damage on unsealed hardwood: Mop mode without sealer may cause water damage based on owner-reported issues

RECORD

How the assessment has moved.

Every announcement, release and reassessment behind the current classification.

Coming soon
Just launched
Active updates
Settled
Discontinued
  1. Aug 2026 · AssessmentRobovations Score revised 78 → 73
  2. Aug 2026 · AssessmentRobovations Score rescored under v4.2: 84 → 78
  3. Aug 2026 · AssessmentRobovations Score rescored under v4.0: 71 → 84
  4. Jul 2026 · AssessmentRobovations Score revised 65 → 71
  5. Jul 2026 · AssessmentRobovations Score recorded at 65 of 100
Editorial comparisons

How Ecovacs Deebot T30 Pro Omni compares.

All comparisons →
Common questions

What people actually ask.

6 answered
OwnershipHow often do mop pads require replacement?
Manufacturer documentation specifies every 1-3 months depending on mopping frequency. Owner forums confirm this interval. Replacement pads cost $15-25 per pair from Ecovacs or third-party retailers.
OperationCan the mopping feature be disabled or removed?
Yes. The mop can be detached entirely, reverting to vacuum-only operation. Owner reports confirm no performance penalty in vacuum mode when the mop module is removed.
OperationWhat is the runtime difference between standard and turbo suction?
Ecovacs publishes up to 290 minutes of runtime, measured in silent mode on hard floor, and a maximum suction of 11,000 Pa. It publishes no runtime figure at maximum suction. Higher suction draws more power and shortens a charge substantially, so turbo is practical for single rooms and spot work rather than whole-floor passes.
OperationCan this robot navigate stairs between floors?
No. Cliff sensors prevent independent stair descent. Manufacturer documentation and owner reports confirm it will not navigate between levels automatically. Multi-floor homes require manual placement on each floor or app-controlled scheduling per floor.
OperationDoes the robot operate without cloud connectivity?
Limited operation only. Cloud connectivity is required for advanced features, scheduling, and room-level zoning. Owner reports confirm the robot defaults to a simplified continuous-clean mode if cloud connectivity is lost mid-session.
OwnershipHow large is the auto-empty dust bag, and how often does it need replacement?
Ecovacs does not publish a bag capacity, replacement interval or bag price for this station in the documentation available. For scale, Ecovacs states about 75 days on a 2.6 L bag for comparable Omni stations, so a change on the order of months rather than weeks is the reasonable expectation.

Availability

Where it's sold

We may earn commission from qualifying purchases. This does not influence classification.

Cite / Embed

Reference the Ecovacs Deebot T30 Pro Omni classification.

Embed the Autonomy Ladder™ mark or copy the citation. The mark is served from this record, so a reassessment updates it on your page automatically.

124161
268112
Clear space 3222 on all sides
Embed code

Scale proportionally only, up to 2× (536px wide)(224px wide). No recolouring, cropping, rotating, or re-typesetting.

Citation

Robovations. "Ecovacs Deebot T30 Pro Omni: Autonomy Level III (Conditional Autonomy)." Autonomy Ladder™, assessed August 2026. https://robovations.com/robots/ecovacs-deebot-t30-pro-omni/

  • Link it. The mark must point at this record. An unlinked mark is not authorised.
  • Hot-link it. Never download, self-host, or re-upload the image. A saved copy stops updating, and a mark that has stopped updating is a claim we no longer stand behind.
  • A classification, not an endorsement. It may not appear beside language implying Robovations recommends, rates, or approves the product.
Where to next

Three ways to keep going.

For browsers

See every Level III.

Every robot we’ve classified at conditional autonomy. Sorted by readiness, score, and price. Filter by category, manufacturer, or release date.

Updated weekly with new entries and reclassifications.