Saved
eufy Omni S2 ProIIIConditionalCompare
Released 2026.11Reassessed 2026.11.05Compare
Eufy

eufy Omni S2 Pro

Floor disinfection is the headline: six UV-C LEDs and an electrolyzed-water generator run beside a hot-water roller mop and 40,000 Pa suction. The UniClean dock washes the roller at 100C and warm-air dries it.

eufy Omni S2 Pro

List price

$1,699.99

Amazon listings

Some links earn Robovations a commission.

Released 2026.11Reassessed 2026.11.05

FIT CHECK

Will the eufy Omni S2 Pro work in your home?

Describe your home using the controls. Each choice reads the spec sheet for you, flagging where the eufy Omni S2 Pro is built for your space and where it isn’t.

Home size

Primary floors

Mopping needs

Upkeep you accept

A classification of fit for the conditions you set, not a recommendation. Verdicts describe engineering design intent, not test results.

OWNERSHIP

Living with it.

Launch-window flagship; dock and disinfection automation are unproven over time.

Unprovenowner-reported arc

The record so far

Only launch coverage exists this early. Eufy's prior omni docks have a broad owner base, but no long-term reports cover the roller mop, UV-C module or electrolyzed-water system on this model yet.

What goes wrong4 documented · 1 self-recover
Occasional
Roller mop hair wrapStreaking, weaker mop contact
Owner fixMonthly roller inspection; clear tangled hair
Occasional
Dock water line cloggingIncomplete mop wash cycles
Owner fixRinse dock tray; clear the debris filter
Occasional
Obstacle miss on dark objectsBumps or skirts small items
Self-recoversNone; the robot reroutes automatically
Rare
High-pile carpet snaggingRobot halts and reports stuck
Owner fixReposition; set no-go zones on shag
Upkeep routine
Monthly12×/yr

Check the 11.4 in roller and auto-extending side brush for tangled hair.

Seasonal4×/yr

Replace the antibacterial dust bag when the app reports it full.

Swap the washable filter and inspect the main brush for wear.

As neededno fixed schedule

Empty the dirty-water and refill the clean-water tank between mopping runs.

Refill the scent cartridge if the dock's diffuser is used.

Cost over timeabout $270 past the sticker over three years
PurchaseRunning cost
Year 1
$1,789
Year 3

$1,969
Year 5

$2,149

$1,699 to buy, then about $90 a year for the replaceable parts below. Over three years that is roughly $270 past the sticker price. Excludes electricity and any repairs.

What you replace
  • Dust bagEvery 3-6 months

Replacement cadence from the maintenance schedule; prices shown where the source documents them. Some links earn Robovations a commission. It does not change any classification. All parts at Eufy

Step-by-step fixes
Safety notes2 cautions · 2 notes
  • CautionUV-C light exposureSix UV-C LEDs can harm eyes and skin; the robot shuts them off when it is lifted.
  • CautionHot water in dockThe dock heats wash water to 100C; keep hands clear during cleaning cycles.
  • Electrolyzed-water handlingFollow the maker's guidance when refilling or draining the water tanks.
  • An onboard RGB camera captures imagery for obstacle recognition; review the app's data settings.
SPECIFICATION

The full spec sheet.

Priced above the category median, with every figure charted against the category below.

Dimensions not publishedDimensional drawing
Key specificationsManufacturer-publishedSources: Product page
Wi-FiThe bands the robot can join; many models need a 2.4 GHz network to set up.
Supported
VoiceThe assistants the maker's app links to; the robot itself does not listen.
Alexa, Google Home
Mapping and navigation

3D ToF laser + RGB camera, CleanMind AI obstacle avoidance (360+ object types)

Where it lands · position among 261 robot vacuumsThis robotMedianTypical range
SuctionAir pressure the fan produces at the intake, in pascals, measured the maker's own way.40,000Pamax mode
1,000 Pa42,000 Pa
Top of range
PriceThe maker's list price, not a price found in a shop.$1,699.99

$160$2,600
Above median

Position shows where the figure sits across the tracked category, not a quality judgment. Suction in Pascals has no standard test method, and the published figure is a peak-mode claim, so it is comparable only within a brand and generation.

Official referencesProduct page
RECORD

How the assessment has moved.

Every announcement, release and reassessment behind the current classification.

Coming soon
Just launched
Active updates
Settled
Discontinued
  1. Nov 2026 · AssessmentReadiness assessed as New to Market
  2. Nov 2026 · AssessmentRobovations Score recorded at 74 of 100
Questions

What people actually ask.

5 answered
OperationDoes the Omni S2 Pro's UV-C disinfection actually sterilize the floor?
The maker claims six 275 nm UV-C LEDs plus electrolyzed water reduce common germs such as E. coli by 99.99%, and the LEDs switch off when the robot is lifted. That figure is a manufacturer claim; no independent home test has been published yet.
OperationHow hot is the HydroJet 3.0 mopping water on the S2 Pro?
The roller mop is fed water at 55C (131F) during cleaning to loosen grease, and the UniClean dock separately washes the roller at 100C before warm-air drying it.
OperationCan the Omni S2 Pro cross raised thresholds between rooms?
It is rated to cross single thresholds up to 1.4 in and stacked thresholds to 2.8 in, enough for most transition strips and room dividers.
OperationDoes the S2 Pro need a dust bag, and how often?
The UniClean dock empties into an antibacterial dust bag. The exact replacement interval for this model is not published yet, so plan on periodic swaps plus refilling the clean and dirty water tanks.
OperationIs the 40,000 Pa suction figure a real-world number?
It is a peak claim from the maker, up from 30,000 Pa on the standard S2. There is no standard industry test for robot-vacuum Pa, so treat it as a comparative spec rather than a measured result.

Availability

Where it's sold

Some links earn Robovations a commission. It does not change any classification. Affiliate disclosure.

Cite & Embed

Reference the eufy Omni S2 Pro classification.

Embed the Autonomy Ladder™ mark or copy the citation. The mark is served from this record, so a reassessment updates it on your page automatically.

Get the embed code and citation
124161
268112
Clear space 3222 on all sides
Embed code

Scale proportionally only, up to 2× (536px wide)(224px wide). No recoloring, cropping, rotating, or re-typesetting.

Citation

Robovations. "eufy Omni S2 Pro: Autonomy Level III (Conditional Autonomy)." Autonomy Ladder™, assessed November 2026. https://robovations.com/robots/eufy-omni-s2-pro/

  • Link it. The mark must point at this record. An unlinked mark is not authorized.
  • Hot-link it. Never download, self-host, or re-upload the image. A saved copy stops updating, and a mark that has stopped updating is a claim we no longer stand behind.
  • A classification, not an endorsement. It may not appear beside language implying Robovations recommends, rates, or approves the product.
Where to next

Three ways to keep going.

For browsers

See every Level III.

Every robot we’ve classified at conditional autonomy. Sorted by readiness, score, and price. Filter by category, manufacturer, or release date.

Updated weekly with new entries and reclassifications.