Saved
Roborock Q5 Pro+IIIConditionalCompare
Released 2023.10Reassessed 2026.09.06Compare
Roborock

Roborock Q5 Pro+

Roborock's most affordable self-emptying dock entry. PreciSense LiDAR navigation and the DuoRoller dual rubber brush without the flagship price, and it vacuums and mops in the same pass. What the price gives up is camera obstacle avoidance and a dock that washes the mop pad.

Roborock Q5 Pro+

List price

$699.99

Released 2023.10Reassessed 2026.09.06

FIT CHECK

Will the Roborock Q5 Pro+ work in your home?

Describe your home using the controls. Each choice reads the spec sheet for you, flagging where the Roborock Q5 Pro+ is built for your space and where it isn’t.

Home size

Primary floors

Mopping needs

Upkeep you accept

A classification of fit for the conditions you set, not a recommendation. Verdicts describe engineering design intent, not test results.

OWNERSHIP

Living with it.

Dock mechanics inherit proven Roborock auto-empty design; PreciSense navigation is simpler than flagship vision, suggesting lower component failure rates.

Stableowner-reported arc

The record so far

Q-series has ~2 years in owner forums with positive stability reports. Main vacuum and dock use established Roborock architecture. Dock auto-empty mechanism is field-tested across S7 MaxV Ultra and S8 lines. No major regression documented in Q5 Pro+ cohort.

What goes wrongnot yet documented independently

The independent record is still forming. Failure modes are listed once an outside source reports them.

Upkeep routine
Weekly52×/yr

Check the DuoRoller rubber for wrapped hair. The all-rubber dual-roller design resists wrapping, but long hair still collects at the bearings. Rinse the mop pad after a mopping run and refill the tank before the next one.

Monthly12×/yr

Filter cleaning or replacement (HEPA cost ~$12); dock inlet and inspection.

Wipe the LiDAR turret and the cliff sensors on the underside.

Seasonal4×/yr

Auto-empty dock replacement (2.5 L E12, ~$15). Roborock rates the bag at up to seven weeks of hands-free operation.

Yearly1×/yr

Brush replacement (~$12); full dock mechanics inspection.

Cost over timeabout $111 past the sticker over three years
PurchaseRunning cost
Year 1
$736
Year 3

$810
Year 5

$884

$699 to buy, then about $37 a year for the replaceable parts below. Over three years that is roughly $111 past the sticker price. Excludes electricity and any repairs.

What you replace

Replacement cadence from the maintenance schedule; prices shown where the source documents them. Some links earn Robovations a commission. It does not change any classification. All parts at Roborock

Safety notes1 caution · 1 note
  • CautionBag breach releases enclosed dust. Confirm seal integrity before dock auto-empty cycle.
  • Dock pinch point at auto-empty interfaceAuto-empty mechanism has moving parts; supervise children during dock operation.
SPECIFICATION

The full spec sheet.

Priced below the category median, with every figure charted against the category below.

14.17 in dia3.8 inDimensional drawing
Key specificationsManufacturer-publishedSources: Manufacturer supportProduct page
FootprintThe width, depth and height of the robot itself, without its dock.
14.17 in dia, 3.8 in tall•
WeightThe robot alone, without its dock, as the maker states it.
8.2 lbs
BatteryStored energy in watt-hours; a larger pack runs longer, not harder.
75 Wh · Li-ion
Wi-FiThe bands the robot can join; many models need a 2.4 GHz network to set up.
2.4 GHz only✓
VoiceThe assistants the maker's app links to; the robot itself does not listen.
Alexa, Google Home✓
Onboard dustbinThe bin inside the robot; an auto-empty dock moves its contents into a bag.
770 mL•
Water tankThe clean-water tank that feeds the mop, on the robot or in the dock.
180 mL•
Dust bagA bag inside the dock that the dock empties the robot's bin into; you replace the bag.
2.5 L•
Threshold climbThe tallest lip the robot is rated to cross; a door sill is about 0.8 in.
0.8 in•
Mapping and navigation

PreciSense LiDAR navigation: 360 degree scanning for mapping and route planning, with multi-level maps stored for up to four floors. No camera-based obstacle avoidance.

Where it lands · position among 261 robot vacuumsThis robotMedianTypical range
SuctionAir pressure the fan produces at the intake, in pascals, measured the maker's own way.5,500Pamax mode
1,000 Pa42,000 Pa
Near median
RuntimeThe maker's stated running time on one charge, at a standard setting.240min

60 min360 min
Above median
PriceThe maker's list price, not a price found in a shop.$699.99

$160$2,600
Near median
NoiseLoudness at the maker's stated distance, in decibels; ten more decibels reads as about twice as loud.71dB

43 dB80 dB
Above median
Charge timeTime from empty to full on the dock, as the maker states it.120min

90 min420 min
Below median
WeightThe robot alone, without its dock, as the maker states it.8.2lbs

3.6 lbs25 lbs
Near median

Position shows where the figure sits across the tracked category, not a quality judgment. Suction in Pascals has no standard test method, and the published figure is a peak-mode claim, so it is comparable only within a brand and generation.

RECORD

How the assessment has moved.

Every announcement, release and reassessment behind the current classification.

Coming soon
Just launched
Active updates
Settled
Discontinued
  1. Nov 2026 · AssessmentRecord status: Provisional → Pending
  2. Sep 2026 · AssessmentRecord status: Verified → Provisional
  3. Aug 2026 · AssessmentRobovations Score rescored under v4.2: 70 → 79
  4. Jul 2026 · AssessmentRobovations Score recorded at 70 of 100
Questions

What people actually ask.

6 answered
OperationWhat is the difference between PreciSense and the ReactiveAI vision on flagship Roborock models?
PreciSense is Roborock’s name for the LiDAR navigation system on this robot. It builds the map and plans the route, with faster mapping, a 3D map display and multi-level maps for up to four floors. It is not an obstacle-detection sensor. ReactiveAI is the separate camera-based obstacle avoidance on Roborock’s higher tiers, which recognizes cables, shoes and pet messes while cleaning. The Q5 Pro+ has the LiDAR but not the camera, so transparent barriers and small floor clutter are handled with no-go zones set in advance. Both sit at Level III autonomy; the camera reduces how often the owner has to intervene.
OperationHow often do I replace the auto-empty dock bag?
Roborock rates the dock’s 2.5 L E12 bag at up to seven weeks of hands-free cleaning. Homes with pets or heavy shedding reach that sooner. Replacement bags run about $15 and are allergen-sealed.
OperationWhy would I choose the Q5 Pro+ over a budget vacuum-only model with no dock?
The dock costs ~$150-200 more but eliminates manual dust bag handling. For owners wanting low-maintenance autonomy, the dock ROI is strong. For owners accepting manual bag swaps, a basic vacuum-only model saves money.
OperationDoes the Q5 Pro+ work on multiple floors?
Yes. LiDAR creates separate floor maps. User assigns rooms and cleaning preferences per floor. Multi-floor reliability is strong on hard-floor layouts.
OperationWhat is the runtime, and can it cover a full home in one pass?
Roborock publishes up to 240 minutes per charge. Actual runtime falls with suction level, carpet load and mopping. The robot returns to its dock when the battery runs low, recharges and resumes where it stopped, so a larger home is a longer cycle rather than an unfinished one.
OperationDoes Roborock plan to add a mopping option to the Q5 Pro+ later?
The Q5 Pro+ already mops. Roborock ships it with a detachable mop and a 180 ml water tank alongside the 770 ml dustbin, and it vacuums and mops in the same pass. Roborock’s own listing for this SKU is the Robot Vacuum and Mop with Auto-Empty Dock. Mopping is not restricted to the S and Saros lines either: the Q Revo range is built around it. What the Q5 Pro+ does not do is wash or dry its own mop pad, which is a dock feature rather than a robot one.

Availability

Where it's sold

Some links earn Robovations a commission. It does not change any classification. Affiliate disclosure.

We are no longer finding a current new-stock listing for this robot. Remaining offers may be used, refurbished, or third-party — confirm the condition and price on the retailer’s page before buying.

Cite & Embed

Reference the Roborock Q5 Pro+ classification.

Embed the Autonomy Ladder™ mark or copy the citation. The mark is served from this record, so a reassessment updates it on your page automatically.

Get the embed code and citation
124161
268112
Clear space 3222 on all sides
Embed code

Scale proportionally only, up to 2× (536px wide)(224px wide). No recoloring, cropping, rotating, or re-typesetting.

Citation

Robovations. "Roborock Q5 Pro+: Autonomy Level III (Conditional Autonomy)." Autonomy Ladder™, assessed September 2026. https://robovations.com/robots/roborock-q5-pro/

  • Link it. The mark must point at this record. An unlinked mark is not authorized.
  • Hot-link it. Never download, self-host, or re-upload the image. A saved copy stops updating, and a mark that has stopped updating is a claim we no longer stand behind.
  • A classification, not an endorsement. It may not appear beside language implying Robovations recommends, rates, or approves the product.
Where to next

Three ways to keep going.

For browsers

See every Level III.

Every robot we’ve classified at conditional autonomy. Sorted by readiness, score, and price. Filter by category, manufacturer, or release date.

Updated weekly with new entries and reclassifications.