ANTHBOT N8 LiDAR
The LiDAR version of ANTHBOT's collecting mower swaps the RTK station for a laser turret aimed at shaded, fenced or tree-heavy gardens, and ANTHBOT cuts its recommended lawn size to 5,400 sq ft from the RTK model's 16,100 sq ft. No independent test of this version has been published.
List price
$1,399
Selling below list
Released 2026.03Reassessed 2026.09.20
Will the ANTHBOT N8 LiDAR work on your yard?
Describe your yard using the controls. Each choice reads the spec sheet for you, flagging where the ANTHBOT N8 LiDAR is built for your space and where it isn’t.
A classification of fit for the conditions you set, not a recommendation. Verdicts describe engineering design intent, not test results.
Living with it.
About six months on sale, with no independent reliability record for this version.
Unprovenowner-reported arc
No independent failure or reliability reports on the LiDAR version were found. The LiDAR turret, collecting fan and auto-dump mechanism are the moving systems to watch.
Clean and store the mower for winter.
Check the 23 L bag and the dump spots set in the app.
Swap between the collecting and mulching discs for the season.
Replace ; ANTHBOT has not published an interval.Typical for robot mowers: seasonally
Wipe the LiDAR turret and ; ANTHBOT rates the body IPX6.
$1,399 to buy. Ongoing running cost for this model hasn’t been assessed yet.
-
CautionBlades spinning at 4,000 rpmThe blade discs spin at 4,000 rpm; keep hands and feet clear and use the stop button.
-
Two cameras and GPS tracking operate in the garden; review the ANTHBOT app privacy settings.
The full spec sheet.
Priced below the category median, with every figure charted against the category below.
- FootprintThe width, depth and height of the robot itself, without its dock.
- 16.97 × 24.02 in, 13.11 in tall
- WeightThe robot alone, without its dock, as the maker states it.
- 36.8 lbs
- BatteryStored energy in watt-hours; a larger pack runs longer, not harder.
- 198 Wh
- Wi-FiThe bands the robot can join; many models need a 2.4 GHz network to set up.
- Supported
- Cutting width
- 7.9 in
- Cutting height range
- 1.2-2.8 in
- Max area
- 5,400 sq ft recommended (about 5,380 sq ft)
- Max slope
- 45% (24°)
- Drive layout
- Two rear drive wheels
- Collection bag capacity
- 23 L, auto-dumping
- Ingress protection
- IPX6
360° LiDAR with dual 150-degree HDR AI cameras
Position shows where the figure sits across the tracked category, not a quality judgment.
How the assessment has moved.
Every announcement, release and reassessment behind the current classification.
-
Nov 2025 · AnnouncementANTHBOT previews N8 LiDAR 4-in-1 robot mower in its 2026 lineup
What people actually ask.
OperationHow is the ANTHBOT N8 LiDAR different from the N8?
OperationDoes the N8 LiDAR need an RTK station?
OperationHow long does the N8 LiDAR mow on a charge?
OperationDoes the N8 LiDAR need a subscription?
OwnershipWhat warranty does ANTHBOT give on the N8 LiDAR?
Where it's sold
Some links earn Robovations a commission. It does not change any classification. Affiliate disclosure.
Some sellers strike through a “was” price of $1,999, above the $1,399 manufacturer list — a discount measured off that is not a real saving.
Reference the ANTHBOT N8 LiDAR classification.
Embed the Autonomy Ladder™ mark or copy the citation. The mark is served from this record, so a reassessment updates it on your page automatically.
Get the embed code and citation
Scale proportionally only, up to 2× (536px wide)(224px wide). No recoloring, cropping, rotating, or re-typesetting.
Robovations. "ANTHBOT N8 LiDAR: Autonomy Level IV (Environmental Autonomy)." Autonomy Ladder™, assessed September 2026. https://robovations.com/robots/anthbot-n8-lidar/
- Link it. The mark must point at this record. An unlinked mark is not authorized.
- Hot-link it. Never download, self-host, or re-upload the image. A saved copy stops updating, and a mark that has stopped updating is a claim we no longer stand behind.
- A classification, not an endorsement. It may not appear beside language implying Robovations recommends, rates, or approves the product.








