Saved
Worx Landroid Vision M800IIIConditionalCompare
Released 2023.04Reassessed 2026.11.01Compare
Worx

Worx Landroid Vision M800

Wire-free operation via vision comes with a trade-off: neural-network boundary detection requires clear grass-to-obstacle contrast, limiting performance on heavily shaded or uniformly mowed boundaries.

Replaced byWorx Landroid Vision Cloud WR310Worx replaced the Landroid Vision line with Landroid Vision Cloud; the WR310 is the quarter-acre model that covers the M800's rated area.
Worx Landroid Vision M800

List price

$1,599

Retail price not tracked

Released 2023.04Reassessed 2026.11.01

FIT CHECK

Will the Worx Landroid Vision M800 work on your yard?

Describe your yard using the controls. Each choice reads the spec sheet for you, flagging where the Worx Landroid Vision M800 is built for your space and where it isn’t.

Yard size

Terrain

Grass type

Boundary setup

A classification of fit for the conditions you set, not a recommendation. Verdicts describe engineering design intent, not test results.

OWNERSHIP

Living with it.

Vision boundary detection steadied across 2024–2025 firmware updates; camera contamination remains the primary failure point.

Improvingowner-reported arc

The record so far

Early firmware versions showed false-obstacle detection in dappled shade. Subsequent updates refined the neural-network threshold. Owner reports since mid-2024 show fewer unwanted stops; camera cleaning frequency remains the dominant reliability concern.

What goes wrongnot yet documented independently

The independent record is still forming. Failure modes are listed once an outside source reports them.

Upkeep routine
Weekly52×/yr

Camera lens cleaning during wet seasons to maintain boundary detection.

Monthly12×/yr

Blade inspection for dulling; debris removal from motors and undercarriage.

Seasonal4×/yr

Blade replacement ($35–$45 per set). The are thin flip-and-replace razors, not a sharpenable edge.

Docking station cleaned of leaves and debris. Charging pins inspected and wiped.

Yearly1×/yr

Battery health check and firmware update via app. Winter storage prep (remove the battery and store it charged, shelter dock from freeze-thaw).

Cost over timeabout $360 past the sticker over three years
PurchaseRunning cost
Year 1
$1,719
Year 3

$1,959
Year 5

$2,199

$1,599 to buy, then about $120 a year for the replaceable parts below. Over three years that is roughly $360 past the sticker price. Excludes electricity and any repairs.

What you replace
  • Every 3-6 months$35–45

Replacement cadence from the maintenance schedule; prices shown where the source documents them. Some links earn Robovations a commission. It does not change any classification. All parts at Worx

Safety notes1 caution · 1 note
  • CautionSpinning blade during dock maneuverBlade continues spinning briefly after dock entry. Keep hands clear of dock cavity during operation.
  • Wi-Fi and cloud account requiredInitial setup and boundary mapping require app connectivity. Mower stores routes locally; cloud outages do not interrupt scheduled runs.
SPECIFICATION

The full spec sheet.

Priced below the category median, with every figure charted against the category below.

24.2 in18.1 in10.4 inDimensional drawing
Key specificationsManufacturer-publishedSources: Product page
FootprintThe width, depth and height of the robot itself, without its dock.
18.1 × 24.2 in, 10.4 in tall✓
WeightThe robot alone, without its dock, as the maker states it.
33.3 lbs•
BatteryStored energy in watt-hours; a larger pack runs longer, not harder.
80 Wh · Li-ion•
Wi-FiThe bands the robot can join; many models need a 2.4 GHz network to set up.
Supported✓
Cutting height range
1.5-3.5 in
Max area
8,710 sq ft
Max slope
30%
Blade system
Multi-blade, 9 supplied
Boundary method
Vision AI camera, no boundary wire
Cutting width
7.5 in✓
Mapping and navigation

RGB camera + neural-network grass/obstacle recognition. No wire or RTK required.

Where it lands · position among 134 robot lawn mowersThis robotMedianTypical range
RuntimeThe maker's stated running time on one charge, at a standard setting.90min
30 min240 min
Near median
PriceThe maker's list price, not a price found in a shop.$1,599

$549$5,999
Near median
NoiseLoudness at the maker's stated distance, in decibels; ten more decibels reads as about twice as loud.59dB

50 dB75 dB
Near median
Charge timeTime from empty to full on the dock, as the maker states it.120min

30 min300 min
Near median
WeightThe robot alone, without its dock, as the maker states it.33.3lbs

13 lbs88.2 lbs
Near median

Position shows where the figure sits across the tracked category, not a quality judgment.

Official referencesProduct page
RECORD

How the assessment has moved.

Every announcement, release and reassessment behind the current classification.

Coming soon
Just launched
Active updates
Settled
Discontinued
  1. Nov 2026 · AssessmentRecord status: Verified → Pending
  2. Aug 2026 · AssessmentRobovations Score rescored under v4.2: 70 → 64
  3. Jul 2026 · AssessmentRobovations Score recorded at 70 of 100
  4. Mar 2024 · ReleaseReaches US retail at $2,399
Editorial comparisons

How Worx Landroid Vision M800 compares.

All comparisons →
Questions

What people actually ask.

6 answered
OperationDoes the Worx Vision M800 need a perimeter wire at all?
No. There is no wire and no map. A wide-angle camera classifies each frame as grass or not-grass about twenty times a second, and the mower turns where the grass ends, so nothing is stored and nothing needs updating afterward. Some owners supplement with physical edging (curb, raised bed) for reliability.
OperationCan the Vision M800 handle yard changes without re-mapping?
No action is needed. The mower holds no stored boundary, so a new shed or an expanded lawn section is read off the camera on the next pass like any other edge. Travel between separated zones uses RFID tags rather than a map.
OperationWhat happens if the camera gets dirty or cloudy?
Owners report boundary-detection failures within 2–3 rainy days. Cleaning the camera lens is a weekly task during wet seasons. Mower will not dock until the boundary clears.
OperationHow does the Vision M800 perform on shaded lawns?
Heavily shaded or dappled grass can confuse the segmentation model, causing false obstacle detection. Because each frame is classified fresh rather than stored, there is nothing to repair afterward; the mower reads the edge correctly again once light and lens conditions improve.
OwnershipWhat is the blade replacement cost and interval?
Factory blades (~$35–$45 per set) last 20–30 hours of mowing. Seasonal replacement (spring/fall) is typical; high-use owners see quarterly swaps. Removal takes 5 minutes.
OperationDoes the dock require winter storage or off-season prep?
Manufacturer recommends 4–6 months of winter storage. Docking station should be cleared of debris and protected from freeze-thaw cycles. Battery should be removed and stored above 32°F.

Cite & Embed

Reference the Worx Landroid Vision M800 classification.

Embed the Autonomy Ladder™ mark or copy the citation. The mark is served from this record, so a reassessment updates it on your page automatically.

Get the embed code and citation
124161
268112
Clear space 3222 on all sides
Embed code

Scale proportionally only, up to 2× (536px wide)(224px wide). No recoloring, cropping, rotating, or re-typesetting.

Citation

Robovations. "Worx Landroid Vision M800: Autonomy Level III (Conditional Autonomy)." Autonomy Ladder™, assessed November 2026. https://robovations.com/robots/worx-landroid-vision-m800/

  • Link it. The mark must point at this record. An unlinked mark is not authorized.
  • Hot-link it. Never download, self-host, or re-upload the image. A saved copy stops updating, and a mark that has stopped updating is a claim we no longer stand behind.
  • A classification, not an endorsement. It may not appear beside language implying Robovations recommends, rates, or approves the product.
Where to next

Three ways to keep going.

For browsers

See every Level III.

Every robot we’ve classified at conditional autonomy. Sorted by readiness, score, and price. Filter by category, manufacturer, or release date.

Updated weekly with new entries and reclassifications.