Skip to content
Saved
RELEASED 2026.02REASSESSED 2026.06.20Compare
Dreame

Dreame X60 Max Ultra Complete

A 3.13 in tall flagship vacuum and mop: 35,000 Pa suction, dual spinning mop pads with 15 N of downward pressure and warmed water, 21.5 mm mop lifting, and a station that empties, washes, dries and refills. The low body is the differentiator, reaching under furniture that stops taller machines. The footprint is a conventional round flagship, and the station serves one floor.

Dreame X60 Max Ultra Complete
FIT CHECK

Will the Dreame X60 Max Ultra Complete work in your home?

Describe your home using the controls. Each choice reads the spec sheet for you, flagging where the Dreame X60 Max Ultra Complete is built for your space and where it isn’t.

Home size

Primary floors

Mopping needs

Upkeep you accept

A classification of fit for the conditions you set, not a recommendation. Verdicts describe engineering design intent, not test results.

OWNERSHIP

Living with it.

Early-market flagship with solid dock integration and unproven long-term durability.

Unprovenowner-reported arc

The record so far

February 2026 release limits data to four months. No major firmware regressions or recalls documented. Dock reliability (water seal, pump longevity) is the primary uncertainty.

What goes wrong4 documented · 0 self-recover
Occasional
Motor load spike, temporary suction dip.
Owner fixSwap bag per manufacturer schedule.
Occasional
Reduced wet cleaning, higher motor draw.
Owner fixRinse weekly; replace every 2–3 months.
Rare
Edge debris accumulation; navigation unaffected.
Owner fixReplace annually from Dreame direct supply.
Rare
Dock water-seal deteriorationSlow water leakage, potential floor damage.
Owner fixInspect quarterly; replace seals if needed.
Upkeep routine
Weekly52×/yr

Check the and main for hair wrap; wipe the station tray.

Seasonal4×/yr

Swap the station . Dreame sells them in multipacks at single-digit dollars each.

Deep-clean the module and inspect the station water seals for mineral deposits.

Drain the station before storage.

Yearly1×/yr

Replace the ; service the station connectors and inlet .

As neededno fixed schedule

Refill the station's clean-water with tap water and empty the dirty-water tank.

Cost over timeabout $552 past the sticker over three years
PurchaseRunning cost
Year 1
$1,883
Year 3

$2,251
Year 5

$2,619

$1,699 to buy, then about $184 a year for the replaceable parts below. Over three years that is roughly $552 past the sticker price. Excludes electricity and any repairs.

What you replace

Replacement cadence from the maintenance schedule; prices shown where the source documents them. Part links may earn a commission and do not influence the classification. All parts at Dreame

Step-by-step fixes
Safety notes2 cautions · 1 note
  • CautionDock pinch pointDust drawer gap presents pinch hazard; supervise children under 10.
  • Auto-refill dock holds standing water; drain before transport to prevent spillage.
  • CautionSteep stair descent riskCliff sensors may miss stairs under 2 inches; use no-go zones on basement transitions.
SPECIFICATION

The full spec sheet.

Priced above the category median, with every figure charted against the category below.

13.78 in dia3.1 inDimensional drawing
Key specificationsManufacturer-published
FootprintThe width, depth and height of the robot itself, without its dock.
13.78 in dia · 3.1 in tall•
WeightThe robot alone, without its dock, as the maker states it.
10.36 lbs•
Wi-FiThe bands the robot can join; many models need a 2.4 GHz network to set up.
2.4 GHz only
VoiceThe assistants the maker's app links to; the robot itself does not listen.
Alexa, Google Home
Threshold climbThe tallest lip the robot is rated to cross; a door sill is about 0.8 in.
3.5 in•
Mop liftHow far the mop pad rises when the robot crosses carpet.
10.4 mm•
Onboard dustbinThe bin inside the robot; an auto-empty dock moves its contents into a bag.
235 mL•
Dust bagA bag inside the dock that the dock empties the robot's bin into; you replace the bag.
3.2 L•
Mapping & navigation

LiDAR SLAM with AI obstacle avoidance and multi-floor persistent mapping

Where it lands · ranked across 255 robot vacuumsThis robotMedianTypical range
SuctionAir pressure the fan produces at the intake, in pascals, measured the maker's own way.35,000Pamax mode
1,000 Pa42,000 Pa
Above median
RuntimeThe maker's stated running time on one charge, at a standard setting.180min

60 min360 min
Near median
PriceThe maker's list price, not a price found in a shop.$1,699.99

$160$2,600
Above median
NoiseLoudness at the maker's stated distance, in decibels; ten more decibels reads as about twice as loud.55dB

43 dB80 dB
Below median
WeightThe robot alone, without its dock, as the maker states it.10.36lbs

3.6 lbs25 lbs
Above median

Position shows where the figure sits across the tracked category, not a quality judgment. Suction in Pascals has no standard test method, and the published figure is a peak-mode claim, so it is comparable only within a brand and generation.

Official referencesProduct page
RECORD

How the assessment has moved.

Every announcement, release and reassessment behind the current classification.

Coming soon
Just launched
Active updates
Settled
Discontinued
  1. Sep 2026 · AssessmentRobovations Score revised 68 → 76
  2. Sep 2026 · AssessmentRecord status: Verified → Provisional
  3. Aug 2026 · AssessmentRecord status: Provisional → Verified
  4. Aug 2026 · AssessmentRobovations Score rescored under v4.2: 63 → 68
  5. Jul 2026 · AssessmentRobovations Score recorded at 63 of 100
Show 1 earlier entryHide earlier entry
Editorial comparisons

How Dreame X60 Max Ultra Complete compares.

All comparisons →
Common questions

What people actually ask.

4 answered
OperationDoes the Dreame X60 Max Ultra's slim body affect pickup on edge debris?
The slim dimension is height, not width, so edge geometry is the same as any round flagship. Edge work is handled by an extending side brush and an extending edge mop that reach past the chassis into corners and along baseboards.
OwnershipWhat is the dust bag replacement cost and frequency?
Dreame rates stations of this generation in the 75 to 100 day range per dust bag, and sells the bags in multipacks at single-digit dollars each. There is no secondary filter pad consumable for this station.
ComparisonHow does the X60 Max Ultra's app compare to competitors on multi-home management?
The app stores multiple floor plans on one device and switches between saved maps. Dreame publishes no limit on the number of locations and no recalibration step for additional ones.
OperationWhat water does the auto-refill station take?
Standard tap water. Dreame sells no water-filter cartridge for this station and recommends none; there is no such accessory in the X60 line.

Availability

Where it's sold

We may earn commission from qualifying purchases. This does not influence classification.

Cite & Embed

Reference the Dreame X60 Max Ultra Complete classification.

Embed the Autonomy Ladder™ mark or copy the citation. The mark is served from this record, so a reassessment updates it on your page automatically.

Get the embed code and citation
124161
268112
Clear space 3222 on all sides
Embed code

Scale proportionally only, up to 2× (536px wide)(224px wide). No recolouring, cropping, rotating, or re-typesetting.

Citation

Robovations. "Dreame X60 Max Ultra Complete: Autonomy Level III (Conditional Autonomy)." Autonomy Ladder™, assessed June 2026. https://robovations.com/robots/dreame-x60-max-ultra-complete/

  • Link it. The mark must point at this record. An unlinked mark is not authorised.
  • Hot-link it. Never download, self-host, or re-upload the image. A saved copy stops updating, and a mark that has stopped updating is a claim we no longer stand behind.
  • A classification, not an endorsement. It may not appear beside language implying Robovations recommends, rates, or approves the product.
Where to next

Three ways to keep going.

For browsers

See every Level III.

Every robot we’ve classified at conditional autonomy. Sorted by readiness, score, and price. Filter by category, manufacturer, or release date.

Updated weekly with new entries and reclassifications.