Saved
Maytronics Dolphin E10IIAssistedCompare
Released 2019.06Reassessed 2026.08.07Compare
Maytronics

Maytronics Dolphin E10

Entry-level positioning with a straightforward single-motor design and no app. Maytronics rates it by pool length, up to 8 m (30 ft), where floor-only coverage suffices. Trade-off: no wall or waterline capability, and CleverClean scans the floor without a stored map, so the route is the machine's to choose.

Maytronics Dolphin E10

List price

$549

Selling below list

See on Amazon

Some links earn Robovations a commission.

Released 2019.06Reassessed 2026.08.07

FIT CHECK

Will the Maytronics Dolphin E10 work in your pool?

Describe your pool using the controls. Each choice reads the spec sheet for you, flagging where the Maytronics Dolphin E10 is built for your space and where it isn’t.

Pool type

Pool size

Debris load

Coverage you want

A classification of fit for the conditions you set, not a recommendation. Verdicts describe engineering design intent, not test results.

OWNERSHIP

Living with it.

Seven years in market with stable operation and zero major recalls. Single-motor simplicity and manual deployment mean fewer failure vectors than multi-motor competitors.

Stableowner-reported arc

The record so far

Owner reports from above-ground and small in-ground pools document consistent performance across multiple seasons with minimal service calls. No documented motor failures in field data. Filter cartridge is the only consumable replacement needed annually.

What goes wrongnot yet documented independently

The independent record is still forming. Failure modes are listed once an outside source reports them.

Upkeep routine
Each useEvery cycle

Lift out the top-load filter cartridge and rinse it with a hose. A loaded filter costs suction directly. Check the cable for tangles and debris.

Uncoil the cable and let it lie straight. Maytronics specifies no anti-tangling swivel on the E10, so twists are worked out by hand.

Seasonal4×/yr

Drain residual water from the unit, then store it and the cable indoors to prevent UV and freeze damage.

Yearly1×/yr

Inspect the motor housing for mineral buildup or corrosion, and check the filter cartridge for tears. Maytronics publishes no scheduled replacement interval for it.

Cost over timeabout $120 past the sticker over three years
PurchaseRunning cost
Year 1
$589
Year 3

$669
Year 5

$749

$549 to buy, then about $40 a year in replaceable parts. Over three years that is roughly $120 past the sticker price. Excludes electricity and any repairs.

Safety notes1 caution
  • CautionCable entanglement and trip hazard40-foot manual-storage cable creates trip risk on pool deck. Secure coiling away from entry points and swimming areas required.
SPECIFICATION

The full spec sheet.

Priced below the category median, with every figure charted against the category below.

17.2 in15.8 in10.4 inDimensional drawing
Key specificationsManufacturer-publishedSources: Product page
FootprintThe width, depth and height of the robot itself, without its dock.
15.8 × 17.2 in, 10.4 in tall✓
WeightThe robot alone, without its dock, as the maker states it.
14.6 lbs✓
Max pool length
30 ft✓
Cycle length
90 min✓
Surfaces cleaned
Floor only✓
Power type
Corded✓
Cable length
40 ft•
Mapping and navigation

CleverClean scanning, single motor, no mapping

Where it lands · position among 76 robot pool cleanersThis robotMedianTypical range
PriceThe maker's list price, not a price found in a shop.$549
$299$4,250
Bottom of range
NoiseLoudness at the maker's stated distance, in decibels; ten more decibels reads as about twice as loud.60dB

52 dB82 dB
Below median
WeightThe robot alone, without its dock, as the maker states it.14.6lbs

7.9 lbs46.3 lbs
Below median

Position shows where the figure sits across the tracked category, not a quality judgment.

Official referencesProduct page
RECORD

How the assessment has moved.

Every announcement, release and reassessment behind the current classification.

Coming soon
Just launched
Active updates
Settled
Discontinued
  1. Sep 2026 · AssessmentRecord status: Provisional → Pending
  2. Aug 2026 · AssessmentRecord status: Verified → Provisional
  3. Aug 2026 · AssessmentRobovations Score rescored under v4.2: 69 → 62
  4. Jul 2026 · AssessmentRobovations Score recorded at 69 of 100
Editorial comparisons

How Maytronics Dolphin E10 compares.

All comparisons →
Questions

What people actually ask.

6 answered
OperationCan the Dolphin E10 handle above-ground pools without damaging the vinyl?
Maytronics sells the E10 for above-ground pools, which are predominantly vinyl-lined, and publishes no surface restriction for it. It publishes no liner or seam testing either, so there is no manufacturer finding to cite in either direction. Two things are worth knowing before deployment: the E10 cleans the floor rather than the walls, and Maytronics specifies no anti-tangling swivel on this model, so the cable is untwisted by hand.
OperationDoes the E10 come with a 40-foot or 60-foot cable?
The E10 ships with a 12 m (40 ft) cable, which Maytronics pairs with a rating of pools up to 8 m (30 ft) in length. Replacement cables are sold through Maytronics own parts and accessories catalog. The cable carries the cleaner’s power, so it is not a part to extend, splice or substitute with a third-party item.
OwnershipHow do I set the filter run duration, and does it auto-adjust?
There is nothing to set. Maytronics specifies a fixed 1.5 hour cycle for the E10 and lists no timer, remote control or app for the model, so the unit runs its cycle and stops. Cleaning frequency is decided by when the owner puts it in the pool.
OperationIs the E10 still sold and supported, or is it being phased out?
The E10 remains in active production and sale as of 2026, and Maytronics has not published discontinuation plans. There is no firmware release history to track: the model has no connectivity, no app and no user-updatable software.
ComparisonWhat is the annual cost to operate the E10 versus hiring pool service?
The filter cartridge is washable and Maytronics publishes no replacement schedule or price for it, so running cost after purchase is the power the unit draws plus parts bought when they wear out. The labor is the part to plan for: every cycle is started and ended by hand.
OperationDoes the E10 work on pools with uneven or sloped bottoms?
Maytronics publishes no slope tolerance for the E10 and no finding on drop-offs or irregular floors, so there is no figure to state. What is published is the machine’s scope: floor cleaning on pools up to 8 m (30 ft), with no wall climbing.

Availability

Where it's sold

Some links earn Robovations a commission. It does not change any classification. Affiliate disclosure.

Cite & Embed

Reference the Maytronics Dolphin E10 classification.

Embed the Autonomy Ladder™ mark or copy the citation. The mark is served from this record, so a reassessment updates it on your page automatically.

Get the embed code and citation
124161
268112
Clear space 3222 on all sides
Embed code

Scale proportionally only, up to 2× (536px wide)(224px wide). No recoloring, cropping, rotating, or re-typesetting.

Citation

Robovations. "Maytronics Dolphin E10: Autonomy Level II (Assisted Autonomy)." Autonomy Ladder™, assessed August 2026. https://robovations.com/robots/maytronics-dolphin-e10/

  • Link it. The mark must point at this record. An unlinked mark is not authorized.
  • Hot-link it. Never download, self-host, or re-upload the image. A saved copy stops updating, and a mark that has stopped updating is a claim we no longer stand behind.
  • A classification, not an endorsement. It may not appear beside language implying Robovations recommends, rates, or approves the product.
Where to next

Three ways to keep going.

For browsers

See every Level II.

Every robot we’ve classified at assisted autonomy. Sorted by readiness, score, and price. Filter by category, manufacturer, or release date.

Updated weekly with new entries and reclassifications.