- Changes
- 3
- Tracking since
- Jan 2026
- Latest
- Apr 15, 2026
- Net movement
- WaitReady Now
Qrevo Curv 2 Flow retail price drops to $849.99 at major US retailersRoborock Qrevo Curv 2 Flow enters retail at $999.99 on January 19, 2026Roborock Qrevo Curv 2 Flow announced at CES 2026 with 20,000 Pa suctionJan 2026Apr 2026
- 2026
-
Qrevo Curv 2 Flow retail price drops to $849.99 at major US retailers
Major US retailers began listing the Qrevo Curv 2 Flow at $849.99, a $150 reduction from the $999.99 launch MSRP, roughly three months after the January 2026 commercial launch.
Full assessment
AutonomyL3 unchangedReadinessReady Now heldScoreValue improvedPrice adjustments at this interval are common for mid-flagship consumer electronics as initial demand cycles settle.
WatchingWhether the new price point is sustained through mid-2026 or represents a temporary promotional reduction.
Impact on autonomy
- No capability changes accompany the price adjustment; Level III classification is unchanged
- Hardware and software configuration identical to the January 19 launch unit
Impact on readiness
- Lower acquisition cost reduces financial barrier for mid-flagship LiDAR segment buyers
- Value score calculation affected by current price moving below launch MSRP by 15%
- No change to setup, maintenance cadence, or consumable costs
Claim check3 claims reviewed
Permanent price reduction to $849.99Retailer listing prices reflect current shelf pricing; whether $849.99 represents a permanent repositioning or a sustained promotional price is not confirmed in manufacturer statements as of this entry dateBest value in mid-flagship LiDAR segment at new priceNo independent segment-wide benchmark exists at this date to substantiate a comparative value claim; the reduction improves the unit's price-to-spec ratio within its own history, not necessarily relative to all competitorsSale pricing available through all authorized retailersPrice data from major US retail listings; availability at $849.99 may vary by retailer and region; gray-market and unauthorized sellers are not reflected in this entryBottom lineThe price drop is a commercial signal worth tracking; it does not alter the unit's documented capabilities or L3 classification.
Technical notes3 sections
- Price Movement Details
-
Launch price: $999.99 MSRP, January 19, 2026. Current shelf price: $849.99 at major US authorized retailers as of approximately April 2026. Price reduction of $150 represents a 15% decrease from MSRP. Hardware configuration unchanged; no new SKU or product revision accompanies the price adjustment.
- Value Assessment Context
-
The Robovations value score for the Qrevo Curv 2 Flow is informed by current_price relative to MSRP and documented feature set. At $849.99 the score_value of 72 (calculated at launch price) improves modestly, reflecting that the unit’s documented LiDAR mapping, 20,000 Pa suction, and heated mop dock now cost less than at launch. Consumable costs remain unchanged: mop pads $10-15 per pair at 30-90 day intervals, HEPA filter and main brush on annual or biannual cycles.
- Retailer Availability
-
Price reduction confirmed across major US authorized retail channels. Manufacturer MAP (minimum advertised price) policy not publicly disclosed; the consistent $849.99 shelf price across multiple retailers suggests a coordinated adjustment rather than individual retailer discounting.
SourcesRTINGS Robot Vacuum Price Tracker 2026-04-15Tom's Guide 2026-04-17 -
Roborock Qrevo Curv 2 Flow enters retail at $999.99 on January 19, 2026
Roborock launched the Qrevo Curv 2 Flow commercially on January 19, 2026, at $999.99 MSRP across authorized US retailers.
Full assessment
AutonomyL3 confirmedReadinessWait → Promising progressScoreScores pendingThe release placed an AI-assisted LiDAR vacuum with an integrated heated mop dock into the mid-flagship price band, filling a gap between entry-level LiDAR models and the brand's top-tier flagships.
WatchingWhether early owner reports confirm the manual floor-selection limitation documented in pre-launch materials.
Impact on autonomy
- LiDAR-plus-camera navigation available to buyers for the first time in this SKU
- Real-world owner testing of multi-floor selection workflow now underway
- AI obstacle detection performance in live home environments subject to ongoing owner reporting
Impact on readiness
- Unit commercially available without preorder backlog per authorized retailer listings
- Setup documentation published; 15-20 minute onboarding confirmed for average home layout
- Mop dock and replacement consumables stocked at launch through authorized channels
Claim check4 claims reviewed
Available immediately across retailersRetailer listings confirmed same-day availability at $999.99 on January 19 with no reported preorder queue or allocation limits in initial weeksDrop-in replacement for prior Qrevo Curv ownersManufacturer documentation does not explicitly position Curv 2 Flow as backward-compatible with Curv dock accessories; buyers with prior Curv docks should verify compatibility before assuming interchangeabilityBest-in-class mid-flagship valueAt $999.99 MSRP the unit sits in a segment with multiple LiDAR competitors at comparable price points; no independent benchmarks available at launch date to substantiate the comparative claimImmediate multi-floor capabilityMulti-floor support confirmed but requires manual app floor selection per session; automatic floor detection is documented as a future firmware target, not a launch featureBottom lineThe retail launch delivered the announced hardware at the announced price; multi-floor automation gap between marketing framing and documented capability is the primary watch item.
Technical notes3 sections
- Retail Launch Details
-
Commercial availability date: January 19, 2026. Launch price: $999.99 MSRP. Distribution confirmed through authorized US retailers. No regional exclusivity or preorder backlog reported in initial retailer listings.
- Unit Shipped Configuration
-
Shipped with integrated dock, two mop pads, HEPA filter, side brush, and power adapter per standard manufacturer packaging. App onboarding requires Roborock account creation and WiFi pairing before first mapping run. Initial floor map generation typically requires 15-20 minutes for a standard multi-room layout per manufacturer setup documentation.
- Compatibility Notes
-
Manufacturer documentation covers dock and consumables specific to the Curv 2 Flow SKU. Cross-compatibility with accessories from the original Qrevo Curv or CurvX lines is not documented in launch materials. Replacement consumable pricing disclosed: mop pads $10-15 per pair, main brush $20-30, side brush and HEPA filter available through Roborock parts catalog.
SourcesRoborock Official Product Page 2026-01-19Tom's Guide 2026-01-22WaitPromising ProgressReadiness -
Roborock Qrevo Curv 2 Flow announced at CES 2026 with 20,000 Pa suction
Roborock announced the Qrevo Curv 2 Flow at CES 2026, disclosing 20,000 Pa suction, LiDAR-plus-camera obstacle detection, and a heated mop dock targeting multi-floor households.
Full assessment
AutonomyL3 confirmedReadinessPromising progress strengthenedScoreScores pendingCommercial availability was set for January 19, 2026, marking the product's entry into the mid-flagship segment at $999.99.
WatchingWhether retail pricing holds through the first half of 2026 as competing mid-tier LiDAR vacuums reach market.
Impact on autonomy
- LiDAR-plus-camera combo announced for dynamic object detection in known environments
- AI obstacle detection capable of identifying objects in pre-mapped rooms
- Multi-floor support confirmed, requiring manual app-based floor selection per session
Impact on readiness
- Commercial launch confirmed at $999.99 across authorized US retailers from January 19
- Mop dock with 40C heated water disclosed, adding wet-cleaning without separate appliances
- Setup estimated at 15-20 minutes per manufacturer documentation at launch
Claim check4 claims reviewed
Fully autonomous multi-floor cleaningManufacturer documentation confirms manual floor selection required in app before each floor session; fully hands-off multi-floor operation is not supported at launchAI obstacle avoidance handles any objectManufacturer press materials describe AI detection for common household objects; owner reports and product FAQ document that scattered toys and unusual objects still require manual clearingHeated mop dock for deep cleaningManufacturer confirms 40C (104F) water temperature; product documentation notes this aids dried-on stains but does not replace manual intervention for heavy kitchen spills or pet accidents20,000 Pa suction at mid-flagship priceManufacturer specification sheet confirms 20,000 Pa; $999.99 MSRP positions the unit below Roborock's top-tier flagships while matching suction figures previously reserved for higher price bracketsBottom lineThe announcement disclosed real hardware advances at a mid-flagship price, with the primary caveat that multi-floor automation requires app intervention.
Technical notes3 sections
- Announced Specifications
-
Suction power: 20,000 Pa per manufacturer specification sheet. Navigation: LiDAR mapping with AI-assisted obstacle avoidance and camera-based dynamic detection. Dimensions: 13.6 x 13.6 x 3.8 inches, weight 10.14 lbs. Battery: 75 Wh Li-ion with 180-minute runtime and 240-minute charge time.
- Dock and Mop System
-
Integrated mop dock heats water to 40C (104F) per manufacturer disclosure. Mop pads require replacement every 30-90 days depending on usage. Auto-dock integration confirmed at announcement. Side brush and HEPA filter included; replacement consumables disclosed as part of ongoing maintenance schedule.
- Connectivity and App
-
WiFi and Bluetooth connectivity with Alexa and Google Home compatibility confirmed in announcement materials. Full app feature set requires cloud account registration; local-only operation limited per manufacturer documentation. Remote scheduling and per-room job configuration available at launch via Roborock app.
SourcesRoborock CES 2026 Press Release 2026-01-07The Verge 2026-01-08
