- Changes
- 2
- Tracking since
- Jan 2026
- Latest
- Jan 20, 2026
- Net movement
- WaitPromising Progress
- 2026
-
eufy Omni S2 launches at retail for $1,599.99 in early 2026
The eufy Omni S2 became commercially available via Amazon and Anker direct at $1,599.99, with the 12-in-1 dock shipping as standard.
Full assessment
AutonomyLIII confirmedReadinessWait → Promising progressScoreScores pendingDock requires plumbed water supply and drain, or manual reservoir fill, which third-party coverage identified as a setup hurdle for most households.
WatchingFor longitudinal owner reports on dock reliability and heating-element longevity.
Impact on autonomy
- CleanMind AI obstacle library active at retail; 200+ type count per manufacturer specs
- Level III classification confirmed: mapping, multi-room scheduling, no teleoperation dependency
- Firmware update cadence established post-launch per eufy support documentation
Impact on readiness
- Shipping via Amazon and Anker direct; same-day or two-day delivery available in North America
- Dock plumbing requirement confirmed as mandatory for full automation; hand-fill reduces automation value
- Annual dock-consumable cost estimated at $150-200 per manufacturer replacement guidance
Claim check5 claims reviewed
Fully hands-free cleaning with 12-in-1 dockDock automates emptying, washing, drying, dispensing, and water management when plumbed; hand-fill users must manually refill and drain, reducing automation to 8-in-1 at bestHydroJet roller mop replaces manual moppingRoller-mop system documented for hard floors and low carpet; owner reports on eufy flagships indicate residue on sealed grout lines; third-party mop benchmarks pending$1,599.99 reflects all-in ownership costDock consumables (filter, heating element, gaskets, detergent) add $150-200 annually per manufacturer replacement schedule; total first-year cost exceeds $1,750CleanMind AI learns your home over timeObstacle library updates via firmware; learning is category-based, not user-trained; owner-specific obstacles outside the 200+ library require manual no-go zone setupQuiet operation at 67 dB67 dB listed at standard mode; max-suction mode noise not separately specified in launch materialsBottom lineRetail launch confirms the Omni S2 is a shipping product with documented specs; dock automation value depends heavily on plumbing installation, and multi-year ownership cost runs materially above the sticker price.
Technical notes4 sections
- Retail Configuration
-
Model T2081111 ships with 12-in-1 dock and HydroJet roller mop included at $1,599.99 MSRP. No accessories-only or robot-only SKU confirmed at launch. Available through Amazon US and Anker direct (eufy.com).
- Dock Installation Requirements
-
Fresh-water supply connection and wastewater drain required for full dock automation. Dock footprint approximately 24 in x 20 in; dedicated power outlet required. Hand-fill reservoir mode supported but disables auto-refill and auto-drain functions, reducing automation scope.
- Consumable Schedule
-
Manufacturer replacement guidance lists dock filter replacement every 3-6 months (approximately $20-30 per set), detergent reservoir refill as needed, heating element service if thermal output drops (approximately $50-70), and annual water-line flush for sediment. Estimated annual consumable spend: $150-200 depending on water hardness and use frequency.
- Navigation at Launch
-
CleanMind AI ships with ToF + MatrixEye 2.0 camera array. Mapping initializes on first run; subsequent passes refine obstacle positions. Firmware update channel active via eufy Home app; update schedule not published.
-
eufy Omni S2 announced at CES 2026 with 12-in-1 dock
Anker introduced the Omni S2 (T2081111) at CES 2026, disclosing a 12-in-1 self-maintaining dock alongside 30,000 Pa suction and CleanMind AI 3D navigation.
Full assessment
AutonomyLIII confirmedReadinessPromising progress strengthenedScoreScores pendingThe dock's hot-water mop-dry and auto-detergent dispensing distinguish it from prior-generation eufy flagships.
WatchingFor confirmed dock plumbing requirements and retail availability date.
Impact on autonomy
- CleanMind AI 3D navigation with ToF sensor disclosed for first time
- MatrixEye 2.0 camera identifies 200+ obstacle types per manufacturer disclosure
- Multi-room scheduling and firmware update cycle confirmed by Anker
Impact on readiness
- 12-in-1 dock announced: auto-empty, auto-wash, hot-water dry, detergent dispense, water refill
- No ship date confirmed at announcement; pre-order status pending
- Dock plumbing requirements (fresh water, drain) disclosed, raising setup complexity flag
Claim check4 claims reviewed
12-in-1 dock automates all consumable tasksManufacturer disclosure lists auto-empty, auto-wash, hot-water dry, detergent dispense, and water refill; independent verification of all 12 functions pending retail release30,000 Pa AeroTurbo suction leads categoryManufacturer spec sheet lists 30,000 Pa; third-party benchmarks not yet conducted at time of announcementCleanMind AI identifies 200+ obstacle typesStated in Anker CES press materials; obstacle-library breadth requires longitudinal owner data to assess real-world miss rateHands-free operation after setupDock requires plumbed fresh water and drain, or manual hand-fill; hands-free claim depends on installation configurationBottom lineCES announcement established the Omni S2 feature set on paper; dock capability and obstacle detection claims require post-launch owner and third-party validation.
Technical notes4 sections
- Announced Specifications
-
Model T2081111 disclosed with 30,000 Pa AeroTurbo suction motor, HydroJet roller-mop system, and 12-in-1 dock combining auto-empty, auto-wash, hot-water mop drying, auto-detergent dispensing, and auto water refill/drain. Battery capacity listed at 72 Wh with 130-minute runtime and 270-minute charge cycle.
- Navigation Architecture
-
CleanMind AI system pairs a 3D Time-of-Flight sensor with MatrixEye 2.0 multi-camera array. Manufacturer claims 200+ obstacle categories in recognition library at launch. LiDAR not listed; navigation classified as camera-and-ToF SLAM at announcement.
- Dock Engineering
-
12-in-1 dock integrates a heating element for mop-roll drying, a detergent reservoir with auto-dispense, and plumbed water inlet/outlet connections. Dock footprint requires dedicated power outlet and either plumbed supply lines or manual reservoir filling. Thermal and water-handling subsystems represent higher failure surface than single-function docks.
- Connectivity
-
Wi-Fi, Bluetooth, Amazon Alexa, and Google Home listed. Local-only operation supported; hot-water scheduling and consumable alerts require eufy app.