Skip to content
Saved
Comparison · 2 robots

Roborock Qrevo MaxV · Samsung Bespoke Jet Bot Combo AI

All robot vacuums. Every measure below is plotted against the full class, so a difference can be read against how much the class itself varies.

  1. Roborock Qrevo MaxV
  2. Samsung Bespoke Jet Bot Combo AI

Up to three

01 Classification

What each one does on its own.

The Autonomy Ladder is the same five rungs for every robot on the site. A rung describes the conditions a robot handles without you, not how good it is.

V
Generalized
Any task, any setting
IV
Environmental
Handles new obstacles without help
III
Conditional
Finishes familiar jobs on its own
Roborock Qrevo MaxVSamsung Bespoke Jet Bot Combo AI
II
Assisted
Runs preset routines, needs rescue
I
Manual
One action, on command
02 Assessment

Where they actually differ.

The Robovations Score is nine inputs across three pillars, each weighted as shown and each scored so that more is better. A robot can lead on one and trail on another, which is the point of showing them apart. Cost of ownership and data handling are reported on each robot's own page and are never averaged into the score.

Capability

Task completion16% of score
Does it finish the job it is sold to do, unattended
  • Roborock Qrevo MaxV97
  • Samsung Bespoke Jet Bot Combo AI80
18median 72 across 381 scored robots100
Coverage and navigation10% of score
Does it work the whole area, and hold that between runs
  • Roborock Qrevo MaxV75
  • Samsung Bespoke Jet Bot Combo AI75
15median 70 across 371 scored robots100
Edge-case recovery10% of score
Does it recover from the failures its category presents
  • Roborock Qrevo MaxV84
  • Samsung Bespoke Jet Bot Combo AI55
18median 50 across 287 scored robots100
Operating envelope4% of score
How far conditions can vary before performance drops
  • Roborock Qrevo MaxV76
  • Samsung Bespoke Jet Bot Combo AI92
25median 68 across 345 scored robots100

Dependability

Field failure rate16% of score
Documented hardware failures per owner-year
  • Roborock Qrevo MaxV88
  • Samsung Bespoke Jet Bot Combo AI48
6median 70 across 371 scored robots100
Software stability14% of score
Whether updates fix more than they break
  • Roborock Qrevo MaxV74
  • Samsung Bespoke Jet Bot Combo AI69
15median 65 across 300 scored robots100
Support longevity10% of score
Committed parts, service and updates, with dates
  • Roborock Qrevo MaxV85
  • Samsung Bespoke Jet Bot Combo AI88
0median 63 across 377 scored robots100

Ownership burden

Routine maintenance12% of score
Hands-on time it asks for in normal operation
  • Roborock Qrevo MaxV97
  • Samsung Bespoke Jet Bot Combo AI94
22median 65 across 382 scored robots100
Consumables8% of score
Parts that must be bought to keep it working
  • Roborock Qrevo MaxV71
  • Samsung Bespoke Jet Bot Combo AI66
8median 69 across 381 scored robots100
03 Measured against the class

How far apart is a long way?

A number only means something next to the spread it sits in. Each track below is the real range across every classified robot in the class, with the median marked.

Price195 with a published figure
  • Roborock Qrevo MaxV$1,399.99
  • Samsung Bespoke Jet Bot Combo AI$1,700
$160median $799.99$2,599
Suction (mode not stated)172 with a published figure
  • Roborock Qrevo MaxV7,000 Pa
  • Samsung Bespoke Jet Bot Combo AI6,000 Pa
1,000 Pamedian 8,000 Pa36,000 Pa
Runtime170 with a published figure
  • Roborock Qrevo MaxV180 min
  • Samsung Bespoke Jet Bot Combo AI180 min
60 minmedian 180 min360 min
Charge time150 with a published figure
  • Roborock Qrevo MaxV240 min
  • Samsung Bespoke Jet Bot Combo AI300 min
90 minmedian 240 min420 min
Noise148 with a published figure
  • Roborock Qrevo MaxV67 dB
  • Samsung Bespoke Jet Bot Combo AI74 dB
43 dBmedian 67 dB80 dB
Weight170 with a published figure
  • Roborock Qrevo MaxV9.9 lbs
  • Samsung Bespoke Jet Bot Combo AI10.6 lbs
3.3 lbsmedian 8.2 lbs25 lbs
Height191 with a published figure
  • Roborock Qrevo MaxV4 in
  • Samsung Bespoke Jet Bot Combo AI3.9 in
2.6 inmedian 3.8 in7.8 in
04 Ownership

What the numbers leave out.

The trade-off

What each design gives up to be good at what it is good at.

Roborock Qrevo MaxV

The FlexiArm extends the mop to the wall edge; it moves nothing. Homes with floor-level obstacle scatter still require a pre-run tidying pass or accepted avoidance routing.

7,000 Pa suction: competitive at launch in early 2024, now below the 10,000-plus Pa ratings of 2025-generation flagships. Cleaning ability in open hard-floor spaces holds up; the gap shows on carpeted zones with heavier debris.

Samsung Bespoke Jet Bot Combo AI

You are paying Level III money for a station that washes, sanitizes and dries the pads without you, and the bill is a 44.4 by 51.0 cm floor footprint standing 54.7 cm tall plus a Samsung account to reach the scheduling.

SmartThings integration simplifies automation for Samsung-invested homes but creates vendor lock-in and limited interoperability with competing platforms.

Station-based washing and disposal reduce manual handling but move the chore rather than remove it: the clean tank is filled and the waste tank emptied by hand, and the wash and dry cycle draws 1200 W each time it runs.

Who each one is wrong for

Stated by the record itself. A robot being wrong for a household is a fact about fit, not a fault.

Roborock Qrevo MaxV
Homes dominated by high-pile or shag carpet
The 10 mm mop lift clears standard and low-pile carpet; owner reports (2024-2026) describe coverage inconsistency on high-pile and shag. Suction performance is rated at 7,000 Pa, which is moderate by 2024 flagship standards.
Privacy-sensitive owners uncomfortable with onboard camera
The RGB camera operates during cleaning sessions to classify obstacles. Roborock documents on-device processing, but the hardware is present and active. Owners who prefer camera-free units have other Level III options without onboard imaging.
Compact apartments under 800 sqft with minimal clutter
The full dock suite occupies meaningful floor space. LiDAR mapping and FlexiArm edge coverage deliver diminishing return in small, open-plan spaces where a lighter setup achieves similar results at lower cost.
Buyers who do not need the full dock suite
Roborock lists the Qrevo MaxV at $1,399.99 and has sold it well below that. At list price, the Dock 2.0 and FlexiArm mopping are what the money buys. Buyers who do not need hot-water mop washing or edge mopping will find comparable LiDAR navigation in less expensive configurations.
Samsung Bespoke Jet Bot Combo AI
Owners expecting a steam mop for floors
Steam on this model is a Clean Station function that sanitizes the mop pads after a run. Nothing is steamed on the floor; the robot mops with two counter-rotating pads and water from its onboard tank.
Space-constrained apartments
Clean Station dimensions of 44.4 cm wide by 51.0 cm deep, standing 54.7 cm tall, put it well past under-sink storage. It needs a permanent floor position beside an outlet and is not moved between runs.
Non-Samsung smart-home users
SmartThings requirement creates friction for Apple Home or Google Home-native households. Third-party integration limited.
Owners wanting a plumbed, hands-off station
The Clean Station has no water connection. The 4 L clean tank is filled by hand and the 3.6 L waste tank emptied by hand, on a cadence set by how much mopping the home needs.

What stays your job

The upkeep ownership hands back to you, whatever the autonomy level says.

Roborock Qrevo MaxV
  • After every use: Confirm dock auto-empty cycle completed; check app for obstacle alerts or skipped zones.
  • Weekly: Inspect side brush for hair tangles; clear brush guard if debris has accumulated.
  • Monthly: Rinse dock wash tray and inlet to prevent mop-pad odor buildup.
  • Every 3-6 months: Replace HEPA filter (roughly $15-25 per filter); inspect mop pads and swap if worn.
  • Every 3-6 months: Clean LiDAR sensor window and camera lens with a dry cloth; check FlexiArm mop attachment for wear.
  • Annually: Inspect dock water reservoir seal and drainage path; verify dock electrical connections are dry.
  • As needed: Refill dock water reservoir when app alerts low level; update firmware via Roborock app when available.
Samsung Bespoke Jet Bot Combo AI
  • After every run: Handled by the Clean Station, which empties the dustbin into its bag, washes the mop pads, sanitizes them with steam and dries them with hot air.
  • Weekly, or as mopping requires: Refill the 4 L clean water tank and empty the 3.6 L waste tank; wipe the station’s docking contacts.
  • Monthly: Clear hair from the brush roll and side brush; check the pre-motor filter.
  • Every 2-3 months: Replace the microfiber mop pads as they lose absorbency; replace the 2.5 L station dust bag when full.
  • Every 6 months: Replace the pre-motor and fine dust exhaust filters; wipe the anti-cliff sensor lenses and the dToF window.
05 Evidence

How much each of these is standing on.

Classifications rest on different depths of evidence. A pre-release assessment and a verified one are not the same kind of claim.

Evidence behind each classification
Robot Evidence status Sources reviewed Last assessed
Roborock Qrevo MaxV Verified 8 Aug 2026
Samsung Bespoke Jet Bot Combo AI Verified 9 Aug 2026

Robovations classifies robots; it does not rank them. Nothing on this page is a recommendation, and no manufacturer influences a classification or its placement here.