Skip to content
Robovations
Robovations™
Robot Autonomy, Classified
Saved
Comparison · 2 robots

Roborock Saros 10R · Samsung Bespoke Jet Bot Combo AI

All robot vacuums. Every measure below is plotted against the full class, so a difference can be read against how much the class itself varies.

  1. Roborock Saros 10R
  2. Samsung Bespoke Jet Bot Combo AI

Up to three

01 Classification

What each one does on its own.

The Autonomy Ladder is the same five rungs for every robot on the site. A rung describes the conditions a robot handles without you, not how good it is.

V
Generalized
Any task, any setting
IV
Environmental
Handles new obstacles without help
III
Conditional
Finishes familiar jobs on its own
Roborock Saros 10RSamsung Bespoke Jet Bot Combo AI
II
Assisted
Runs preset routines, needs rescue
I
Manual
One action, on command
02 Assessment

Where they actually differ.

The Robovations Score is nine inputs across three pillars, each weighted as shown and each scored so that more is better. A robot can lead on one and trail on another, which is the point of showing them apart. Cost of ownership and data handling are reported on each robot's own page and are never averaged into the score.

Capability

Task completion16% of score
Does it finish the job it is sold to do, unattended
  • Roborock Saros 10R80
  • Samsung Bespoke Jet Bot Combo AI80
18median 72 across 381 scored robots100
Coverage and navigation10% of score
Does it work the whole area, and hold that between runs
  • Roborock Saros 10R75
  • Samsung Bespoke Jet Bot Combo AI75
15median 70 across 371 scored robots100
Edge-case recovery10% of score
Does it recover from the failures its category presents
  • Roborock Saros 10R70
  • Samsung Bespoke Jet Bot Combo AI55
18median 50 across 287 scored robots100
Operating envelope4% of score
How far conditions can vary before performance drops
  • Roborock Saros 10R100
  • Samsung Bespoke Jet Bot Combo AI92
25median 68 across 345 scored robots100

Dependability

Field failure rate16% of score
Documented hardware failures per owner-year
  • Roborock Saros 10R73
  • Samsung Bespoke Jet Bot Combo AI48
6median 70 across 371 scored robots100
Software stability14% of score
Whether updates fix more than they break
  • Roborock Saros 10R77
  • Samsung Bespoke Jet Bot Combo AI69
15median 65 across 300 scored robots100
Support longevity10% of score
Committed parts, service and updates, with dates
  • Roborock Saros 10R73
  • Samsung Bespoke Jet Bot Combo AI88
0median 63 across 377 scored robots100

Ownership burden

Routine maintenance12% of score
Hands-on time it asks for in normal operation
  • Roborock Saros 10R100
  • Samsung Bespoke Jet Bot Combo AI94
22median 65 across 382 scored robots100
Consumables8% of score
Parts that must be bought to keep it working
  • Roborock Saros 10R86
  • Samsung Bespoke Jet Bot Combo AI66
8median 69 across 381 scored robots100
03 Measured against the class

How far apart is a long way?

A number only means something next to the spread it sits in. Each track below is the real range across every classified robot in the class, with the median marked.

Price196 with a published figure
  • Roborock Saros 10R$1,599.99
  • Samsung Bespoke Jet Bot Combo AI$1,700
$160median $799.99$2,599
Suction (mode not stated)174 with a published figure
  • Roborock Saros 10R22,000 Pa
  • Samsung Bespoke Jet Bot Combo AI6,000 Pa
1,000 Pamedian 8,000 Pa36,000 Pa
Runtime174 with a published figure
  • Roborock Saros 10R180 min
  • Samsung Bespoke Jet Bot Combo AI180 min
60 minmedian 180 min360 min
Charge time155 with a published figure
  • Roborock Saros 10R150 min
  • Samsung Bespoke Jet Bot Combo AI300 min
90 minmedian 240 min420 min
Noise151 with a published figure
  • Roborock Saros 10R55 dB
  • Samsung Bespoke Jet Bot Combo AI74 dB
43 dBmedian 67 dB80 dB
Weight169 with a published figure
  • Roborock Saros 10R9 lbs
  • Samsung Bespoke Jet Bot Combo AI10.6 lbs
3.6 lbsmedian 8.4 lbs25 lbs
Height192 with a published figure
  • Roborock Saros 10R3.1 in
  • Samsung Bespoke Jet Bot Combo AI3.9 in
2.6 inmedian 3.8 in7.8 in
04 Ownership

What the numbers leave out.

The trade-off

What each design gives up to be good at what it is good at.

Roborock Saros 10R

You are paying for a Level III robot that does one genuinely new thing: the complete dock cycle (vacuum, 80°C mop wash, forced dry, automatic pad removal) in a single station.

The dock cycle that justifies the price also requires monthly consumable management (detergent, water, pad replacement) that simpler units do not.

Samsung Bespoke Jet Bot Combo AI

You are paying Level III money for a station that washes, sanitizes and dries the pads without you, and the bill is a 44.4 by 51.0 cm floor footprint standing 54.7 cm tall plus a Samsung account to reach the scheduling.

SmartThings integration simplifies automation for Samsung-invested homes but creates vendor lock-in and limited interoperability with competing platforms.

Station-based washing and disposal reduce manual handling but move the chore rather than remove it: the clean tank is filled and the waste tank emptied by hand, and the wash and dry cycle draws 1200 W each time it runs.

Who each one is wrong for

Stated by the record itself. A robot being wrong for a household is a fact about fit, not a fault.

Roborock Saros 10R
Buyers comparing against simpler self-emptying vacuums
Without mopping requirements, the wash, dry and detergent hardware in the dock adds purchase cost and a consumable stream that a self-emptying-only vacuum does not carry.
Multi-floor homes expecting the same automation on every level
The dock is a single-floor installation and maps are stored per floor. Carrying the robot upstairs works, but emptying, washing and drying only happen where the dock is.
Frequently rearranged apartments
LiDAR map invalidation on furniture moves requires remapping sessions. Cramped layouts reduce the zone-segmentation value that justifies the premium.
Those expecting reactive or on-demand spot cleaning
Scheduled, session-based cleaning is the design model. Reactive spot triggers via app are possible but slower than manual spot cleaning; the dock cycle adds 20–40 minutes per session.
Samsung Bespoke Jet Bot Combo AI
Owners expecting a steam mop for floors
Steam on this model is a Clean Station function that sanitizes the mop pads after a run. Nothing is steamed on the floor; the robot mops with two counter-rotating pads and water from its onboard tank.
Space-constrained apartments
Clean Station dimensions of 44.4 cm wide by 51.0 cm deep, standing 54.7 cm tall, put it well past under-sink storage. It needs a permanent floor position beside an outlet and is not moved between runs.
Non-Samsung smart-home users
SmartThings requirement creates friction for Apple Home or Google Home-native households. Third-party integration limited.
Owners wanting a plumbed, hands-off station
The Clean Station has no water connection. The 4 L clean tank is filled by hand and the 3.6 L waste tank emptied by hand, on a cadence set by how much mopping the home needs.

What stays your job

The upkeep ownership hands back to you, whatever the autonomy level says.

Roborock Saros 10R
  • After every use: Review app notification for tank status; empty dock tray if detergent foam overflow occurs.
  • Weekly: Clear side brush debris to maintain edge pickup. The DuoDivide dual parallel roller is rated at a 0 percent hair tangling rate, so unwinding hair from the main brush is not the routine task it is on single-roller machines.
  • Monthly: Refill the 20 oz detergent reservoir; empty and refill the clean water tank.
  • Every 2-3 months: Replace dust bag in dock base (Roborock bags approximately $15 for 3-pack); dock dust storage runs up to 70 days at typical use.
  • Every 3-6 months: Replace main brush and side brush set (approximately $20–$30 per set); replace HEPA filter.
  • By inspection: Replace mop pads when the fabric is matted or thinning. Roborock publishes no wash-cycle interval for them.
  • Annually: Inspect dock pump and seals for mineral buildup; descale hot-water circuit if in high-mineral water area.
Samsung Bespoke Jet Bot Combo AI
  • After every run: Handled by the Clean Station, which empties the dustbin into its bag, washes the mop pads, sanitizes them with steam and dries them with hot air.
  • Weekly, or as mopping requires: Refill the 4 L clean water tank and empty the 3.6 L waste tank; wipe the station’s docking contacts.
  • Monthly: Clear hair from the brush roll and side brush; check the pre-motor filter.
  • Every 2-3 months: Replace the microfiber mop pads as they lose absorbency; replace the 2.5 L station dust bag when full.
  • Every 6 months: Replace the pre-motor and fine dust exhaust filters; wipe the anti-cliff sensor lenses and the dToF window.
05 Evidence

How much each of these is standing on.

Classifications rest on different depths of evidence. A pre-release assessment and a verified one are not the same kind of claim.

Evidence behind each classification
Robot Evidence status Sources reviewed Last assessed
Roborock Saros 10R Verified 8 Aug 2026
Samsung Bespoke Jet Bot Combo AI Verified 10 Sep 2026

Robovations classifies robots; it does not rank them. Nothing on this page is a recommendation, and no manufacturer influences a classification or its placement here.