Skip to content
Saved

ComparisonDegrii Zima Pro and Beatbot AquaSense Pro

Up to three

All robot pool cleaners. Every figure below is placed against the whole class, so a gap can be read against how much the class itself varies.

Where each one suits you.

The conditions each robot was assessed against, side by side. Rows marked in gold are where these machines genuinely differ.

Fit verdicts by condition for each robot
Condition Degrii Zima Pro Beatbot AquaSense Pro
Pool type
In-ground GoodManufacturer rates depth from 2 ft to 11 ft and coverage to 5,000 sq ft, well inside typical in-ground dimensions. GoodDesigned for in-ground installations; smart-mapping calibration optimized for fixed pool geometry.
Above-ground DependsNo above-ground-specific validation was found; the tethered floating battery pack remains an added component to manage regardless of pool type. DependsWorks but optical sensor calibration more sensitive to pool wall material; vinyl above-ground pools require careful mapping setup.
Mixed setup GoodThe 2 to 11 ft depth range and 5,000 sq ft rating apply to both installation types. GoodSmart-mapping adapts to both in-ground and above-ground installations when initial calibration accounts for pool material.
Pool size
Small (< 400 sqft) GoodRated to 5,000 sq ft with a 210-minute floor cycle; a small pool leaves most of that capacity unused. Good90-minute runtime covers small pools under 1500 sqft in single session; ideal use case per owner reports.
Medium (400 – 800) GoodA 210-minute floor-mode runtime and 5,000 sq ft rated coverage clear a medium pool well within a single cycle. GoodOptimal range for 1500-3000 sqft pools; battery runtime completes full coverage in typical weekly cleaning cycle.
Large (> 800)they differ GoodManufacturer coverage rating of 5,000 sq ft comfortably spans large pools within the 210-minute floor or overall cycle. DependsPools over 3000 sqft require multiple launches per cleaning session; battery depletion mid-cycle limits single-session autonomy.
Debris load
Fine (sand / silt) GoodThe interchangeable 100-micron ultra-fine basket is built for sand and silt, separate from the coarser 180-micron option. GoodFilter cartridge handles fine particles (sand, pollen) without suction loss in normal maintenance intervals.
Leaves / large debristhey differ GoodThe 180-micron basket handles coarser leaf and large debris loads, distinct from the fine 100-micron insert. DependsHigh leaf loads reduce battery runtime and increase filter replacement frequency from 2-4 weeks to weekly replacement in autumn.
Algae / heavy foulingthey differ DependsNo independent test of cleaning performance against algae was located; only manufacturer and sponsored coverage describe this robot. PoorHeavy algae blooms confuse optical smart-mapping sensors; coverage gaps and sensor recalibration errors documented in owner reports.
Coverage you want
Floor only GoodFloor mode alone runs up to 210 minutes, the longest of the four selectable cleaning modes. GoodSystematic floor coverage is core capability; smart-mapping ensures 100 percent floor contact without missed spots.
Floor + walls GoodA dedicated wall mode runs up to 150 minutes, cleaning walls separately from the floor-only pass. GoodWaterline and wall coverage documented in manufacturer specs and owner reports; two-brush design handles vertical surfaces.
Floor + walls + waterline GoodOverall mode covers floor, wall and waterline in one cycle, plus an app command to climb toward the line. GoodFlotation line cleaning included in smart-mapping routine; no separate waterline mode required.

A robot being poor for a condition is a fact about fit, not a fault. “Depends” means the record names a limit worth reading, not that the answer is unknown.

Keep going.

Robovations classifies robots; it does not rank them. Nothing on this page is a recommendation, and no manufacturer influences a classification or its placement here.