- Changes
- 3
- Tracking since
- Jul 2023
- Latest
- Oct 8, 2024
- Net movement
- Classification stable
- 2024
-
Automower Connect app update adds schedule and zone management changes
Husqvarna updated the Automower Connect app with revised scheduling and notification controls affecting the 310 NERA's remote management interface.
Full assessment
AutonomyL2 unchangedReadinessReady Now heldScoreScores unchangedThe update does not alter navigation behavior or boundary capabilities; it addresses how owners configure cutting windows and receive operational alerts. Consistency of app connectivity over Wi-Fi versus cellular handoff is worth continued monitoring per owner forum reports.
Impact on autonomy
- App update does not modify on-device navigation firmware or boundary detection
- Scheduling granularity improved; does not affect random-path coverage behavior
- Wire-guided autonomy level remains Level II regardless of app revision
Impact on readiness
- More granular scheduling reduces owner intervention for seasonal cutting adjustments
- Notification reliability improvements reduce missed-alert incidents per owner reports
- App changes apply to both wire-only and EPOS-equipped NERA mowers
Claim check3 claims reviewed
New app gives you full control of your AutomowerRemote scheduling and status monitoring confirmed; wire-only 310 NERA owners cannot adjust cutting zones remotely. App control scope is constrained by the mower's hardware capabilitiesImproved notifications keep you informedOwner reports on Husqvarna forums note reduced missed alerts after the update; Wi-Fi to cellular handoff reliability remains inconsistently reported across device typesWorks seamlessly with all NERA mowersApp is compatible with all NERA platform units; feature availability differs between wire-only and EPOS-equipped configurations. Zone management features require EPOS hardware to functionBottom lineThe app update is a meaningful quality-of-life improvement for scheduling and alerts, but does not expand the functional capabilities of wire-guided 310 NERA owners beyond better remote visibility.
Technical notes4 sections
- App Update Scope
-
The Automower Connect app update revised scheduling controls to allow finer time-window configuration for cutting sessions. Prior versions supported day-level scheduling; the updated interface allows hour-level window adjustment across weekday and weekend profiles. The change applies to iOS and Android clients simultaneously.
- Notification System
-
Alert categories for fault conditions (wire break detection, stuck mower, charging fault) were revised to reduce duplicate notifications per owner forum reports. The update also added persistent status indicators for mowers in error state, addressing a reported issue where short-duration alerts were missed during sleep mode on mobile devices.
- Wire-Only Constraints
-
Zone management and virtual boundary features visible in the app interface require EPOS hardware. On wire-only 310 NERA units, these interface elements are present but inactive. Manufacturer documentation confirms this behavior is by design; the app serves both wire-guided and EPOS-equipped NERA variants from a single codebase.
- Connectivity Notes
-
App communicates with the mower via Wi-Fi direct connection when in range, switching to cloud relay for remote access. Owner reports describe intermittent delays on the cloud relay path during cellular-only access; behavior is consistent with other cloud-dependent robotic mower platforms and is not specific to this update.
-
EPOS plug-in kit reaches broader retail availability for NERA mowers
Husqvarna expanded dealer-channel availability of the EPOS plug-in kit for NERA platform mowers, including the 310 NERA.
Full assessment
AutonomyL2 unchangedReadinessReady Now heldScoreScores unchangedThe kit enables a Level II-to-upgrade-path transition for existing wire-guided owners. Installation configuration and kit pricing relative to the 310's base cost remain the primary considerations for owners evaluating the retrofit.
Impact on autonomy
- EPOS retrofit availability expands GPS systematic coverage option for wire-only owners
- Wire-guided baseline navigation remains unchanged without the kit installed
- Retrofit does not alter hardware or chassis; autonomy gain is conditional on kit purchase
Impact on readiness
- Broader dealer availability reduces sourcing friction for EPOS kit procurement
- Installation still requires reference antenna placement and app-based configuration
- Kit cost adds to total platform investment; net readiness unchanged for wire-only owners
Claim check3 claims reviewed
EPOS kit transforms the 310 NERA into a precision mapping mowerDocumented: EPOS adds RTK-GPS and systematic path planning. The transformation is real but requires separate purchase, installation, and ongoing GPS reference antenna maintenanceRetrofit available at dealers nationwideDealer availability expanded in 2024 per Husqvarna channel communications; geographic coverage varies by dealer density; direct-to-consumer online availability confirmed through Husqvarna's websiteSimple plug-in installationOwner reports and manufacturer documentation indicate multi-step configuration including reference antenna positioning, app pairing, and boundary remapping; not a single-cable installBottom lineEPOS availability is a genuine pathway to upgraded operation, but the economics and installation complexity mean it is not a casual add-on for most 310 NERA owners.
Technical notes4 sections
- EPOS Kit Components
-
The EPOS plug-in kit for the NERA platform includes an RTK-GPS receiver module, a reference antenna, and mounting hardware. The module connects to the mower’s existing connector port; no chassis modification is required. Reference antenna placement requires a clear sky view and stable mounting point near the cutting area.
- Configuration Process
-
After hardware installation, configuration proceeds through the Automower Connect app. The process involves registering the reference antenna, calibrating the RTK baseline, and remapping cutting zones as virtual boundaries. Manufacturer documentation indicates initial setup time of approximately one to two hours depending on yard complexity.
- Navigation Change Post-Retrofit
-
With EPOS installed, the mower switches from random-path wire-guided operation to systematic GPS-guided coverage. Path planning uses RTK positioning with documented centimeter-level accuracy under clear-sky conditions. Signal degradation under dense tree canopy is noted in manufacturer documentation as a limiting factor for coverage consistency.
- Dealer Channel
-
Kit distribution expanded through Husqvarna’s authorized dealer network and direct Husqvarna online store in 2024. Pricing confirmed as a separate purchase from the base mower; specific MSRP varies by market.
- 2023
-
Husqvarna launches NERA platform including Automower 310 NERA
Husqvarna released the NERA platform mowers commercially, with the 310 NERA positioned as the entry-level wire-guided unit.
Full assessment
AutonomyL2 confirmedReadinessPromising progress strengthenedScoreScores unchangedThe EPOS plug-in kit was offered as a retrofit option from launch, separating hardware cost from navigation capability. Retail stocking and EPOS kit availability in the broader channel is worth monitoring as the platform matures.
Impact on autonomy
- Wire-guided random-path navigation confirmed as baseline Level II operation
- EPOS retrofit path documented at launch for GPS systematic coverage upgrade
- No systematic mapping in wire-only mode; boundary geometry defines coverage area
Impact on readiness
- Retail availability established through authorized Husqvarna dealer network
- EPOS kit pricing adds to total cost of ownership for GPS-capable setup
- Perimeter wire installation requirement maintained from prior 310 generation
Claim check4 claims reviewed
NERA platform delivers smarter, more flexible mowingFlexibility is conditional on purchasing the EPOS retrofit kit; wire-only baseline operates identically to prior-generation wire-guided modelsEasy setup with no buried wire requiredManufacturer specs confirm surface-laid wire is supported, but installation still requires boundary planning and perimeter routing; owner reports note multi-hour setup for average yardsEPOS upgrade future-proofs the investmentEPOS retrofit is a documented option, but kit cost and configuration time offset the 310's entry-level price advantage; not a free capability unlockAutomower Connect app provides full controlApp connectivity confirmed; scheduling and status monitoring documented. Remote zone editing requires EPOS hardware; wire-only units cannot adjust boundaries without physical wire changesBottom lineThe NERA platform launch introduced a genuine upgrade path, but the 310's wire-guided baseline is architecturally unchanged from prior Automower generations.
Technical notes4 sections
- Platform Architecture
-
The NERA platform introduced a modular hardware design allowing the same chassis to operate with either perimeter wire or the EPOS GPS kit. The 310 NERA uses wire-guided random-path navigation as the standard configuration. Navigation relies on perimeter wire signal detection; the mower reverses course on wire contact and resumes cutting in a new random direction within the boundary.
- EPOS Retrofit Path
-
Husqvarna published an EPOS (Exact Positioning Operating System) plug-in kit compatible with NERA-generation mowers including the 310 NERA. The kit adds RTK-GPS receiver hardware and enables systematic coverage mapping, replacing random-path operation. Installation requires a reference antenna placement and configuration via the Automower Connect app.
- Connectivity
-
Wi-Fi and Bluetooth connectivity confirmed. Automower Connect app (iOS and Android) provides scheduling, status alerts, and PIN-lock theft protection. Remote boundary adjustment is not supported in wire-only configuration.
- Physical Specifications
-
Manufacturer dimensions: approximately 24 in width, 20 in depth, 10 in height. Published weight approximately 15 lbs. Li-ion battery pack. Maximum gradient rating 25% per manufacturer specifications.