Dreame Z1 Pro
- Changes
- 2
- Tracking since
- May 2025
- Latest
- Jun 16, 2025
- Net movement
- Classification stable
- 2025
-
Dreame Z1 Pro review finds early defects; firmware update boosts cleaning
A June 2025 PCWorld review documented an unresponsive included remote, incomplete pool coverage after a storm test, and a navigation fault that stalled the Z1 Pro for nearly ten minutes.
Full assessment
AutonomyL3 heldReadinessPromising Progress unchangedScoreScores unchangedA firmware update issued during testing raised measured cleaning performance to about 90 percent, though the reviewer judged the result still short of expectations at the price. Later firmware behavior is worth watching.
Impact on autonomy
- Navigation stalled in place for close to ten minutes during at least one test run.
- Pool-shape mapping produced inconsistent results across repeated runs, per the reviewer's account.
- A firmware update raised measured cleaning coverage to about 90 percent afterward.
Impact on readiness
- Included remote required up to a minute of repeated button presses to respond.
- Docked robot sinks back into the pool after five minutes if not retrieved.
- Firmware fix improved cleaning outcomes but remained below expectations for the reviewed price.
Claim check4 claims reviewed
PoolSense technology reads pool shape for optimized coverage, per CES 2025 coverage of the launch.PCWorld's June 2025 review found the filter basket less than half full after three hours following a post-storm test, with the pool visibly uncleaned.A poolside-operable LiFi remote is promoted as a signature control feature.The reviewer's initial remote would not power on; a replacement required up to a minute of repeated button presses to respond, per PCWorld.Smart app mapping is presented as a core navigation feature.The app produced a usable map on one run but inconsistent maps on later attempts, per PCWorld's account.Automated poolside parking is described as part of the cordless design.The robot waits five minutes at the waterline after finishing before sinking back to the pool floor if not retrieved, per PCWorld.Bottom lineA firmware update issued during PCWorld's testing measurably improved cleaning performance, but the documented defects point to a gap between the Z1 Pro's marketed capability and its early real-world reliability.
Technical notes2 sections
- Documented Issues
-
PCWorld’s June 2025 review of the Dreame Z1 Pro described an initial remote control that would not power on; a replacement unit still required repeated button presses, sometimes up to a minute, to register commands. During a post-storm cleaning test, the robot’s filter basket was less than half full after three hours, and the pool remained visibly uncleaned. With synthetic leaves used as a debris test, the robot recovered roughly two-thirds of the material. The reviewer also reported the robot stopping mid-pool and spinning in place for close to ten minutes, and app-generated pool maps that were usable on one run but inconsistent on later attempts.
- Firmware Response
-
Dreame issued a firmware update during the review period; no version number was disclosed. Following the update, the reviewer completed six full cleaning runs and reported a cleaning rate of about 90 percent, an improvement the review characterized as still below expectations for the unit’s reviewed price of $1,099. The robot’s waterline docking behavior, which allows five minutes before the unit sinks back to the pool floor if not retrieved, was unchanged by the update.
-
Dreame Z1 Pro robotic pool cleaner reaches retail after CES 2025 debut
Dreame's Z1 Pro cordless robotic pool cleaner, unveiled at CES 2025 in January with a planned March ship date, reached broader retail availability by May 2025.
Full assessment
AutonomyL3 heldReadinessPromising Progress strengthenedScoreScores unchangedThe $1,599.99 unit appeared in discounted Amazon and manufacturer-site listings, shifting from the earlier pre-order-only window. Independent reviews of real-world performance had not yet been published and should be watched as adoption grows.
Impact on autonomy
- PoolSense shape recognition and ultrasound plus 3D structured light navigation ship as announced.
- Triple Surround Fusion Perception System handles pool boundary detection without teleoperation.
Impact on readiness
- Retail availability replaces pre-order-only access, widening the buyer pool beyond early reservations.
- Promotional pricing near $999 lowered the effective cost below the $1,599.99 list price.
Claim check3 claims reviewed
$1,599.99 list price announced at the CES 2025 debut, per PCWorld.Promotional pricing near $999 to $999.99 appeared on Amazon and Dreame's own site by May 2025, per PoolMagazine.com.PoolSense pool-shape recognition and a Triple Surround Fusion Perception System were the headline navigation claims at launch.No independent, dated verification of real-world coverage accuracy had been published when retail promotions began in May 2025.Pre-order coverage in January 2025 pointed to a March 2025 shipping target.PoolMagazine.com's documented retail promotions did not appear until May 2025, roughly two months later.Bottom lineRetail pricing and promotions surfaced roughly two months after the originally announced shipping target, while independent verification of the product's navigation claims still awaited later reviews.
Technical notes2 sections
- Launch Timeline
-
Dreame introduced the Z1 Pro cordless robotic pool cleaner at CES 2025 in January, with pre-sales opening January 7 and a shipping target of March 2025, according to PCWorld’s coverage of the debut. The unit carried a list price of $1,599.99, with an advertised $600 pre-order discount and a one-year extended warranty for early buyers. By May 2025, the product had moved past pre-order status into broader retail channels.
- Retail Pricing
-
PoolMagazine.com documented promotional pricing in May 2025, with the Z1 Pro discounted to $999.99 on Amazon from May 12 to May 18, and to $999 on Dreame’s own site through May 30. The coverage also noted Frost and Sullivan honors for the product, citing it as the first cordless robotic pool cleaner with a poolside-operable remote controller and the first robotic pool cleaner with a triple surround fusion perception system. No independent, dated review of real-world coverage accuracy had been published at this point in the rollout.