- Changes
- 2
- Tracking since
- Dec 2025
- Latest
- Jan 11, 2026
- Net movement
- Classification stable
AquaSense 2 Ultra live demo at CES 2026 shows autonomous mode sequencing in pool tankBeatbot teases AquaSense 2 Ultra spec sheet ahead of CES 2026 debutDec 2025Jan 2026
- 2026
-
AquaSense 2 Ultra live demo at CES 2026 shows autonomous mode sequencing in pool tank
Beatbot ran a live in-pool demonstration of the AquaSense 2 Ultra at CES 2026, showing the robot autonomously transitioning from floor cleaning to wall climbing and then waterline brushing within a controlled pool tank environment.
Full assessment
AutonomyL3 capabilities expandedReadinessPromising progress strengthenedScoreScores unchangedThe demo provided the first visible evidence of multi-surface mode sequencing without manual repositioning. Demo conditions were controlled; the significance is that the autonomous sequencing architecture executes as described, not that performance scales to real-world debris loads and pool geometries.
Impact on autonomy
- Live transition from floor to wall to waterline mode observed without operator intervention
- Camera obstacle detection responded to submerged object in controlled demo environment
- Surface skimming mode demonstrated as the terminal phase of a full-pool cleaning cycle
Impact on readiness
- Demo evidence upgrades autonomous sequencing from claimed to observed in controlled conditions
- Controlled tank environment limits transfer to complex real-world pool geometries
- No owner or third-party field deployment data exists at this stage
Claim check4 claims reviewed
Fully autonomous multi-surface cleaning without human repositioningDemo showed floor-to-wall-to-waterline sequencing in controlled tank; whether the sequencing logic handles geometric variation in real pools is not demonstratedAI camera identifies and avoids obstacles in real timeCamera response to a submerged test object was observed in CES demo; performance with organic debris (leaves, algae) at varied pool depths not demonstratedSurface skimmer integrates into the cleaning cycle automaticallySkimming shown as final phase of demo cycle; skimmer effectiveness on floating debris not assessed under demo conditionsCordless design performs equal to tethered systems in coverageDemo run completed in a small controlled tank; coverage consistency in pools at or above 15,000 gallons not addressed in CES demonstrationBottom lineThe demo advances the product's claim status from manufacturer assertion to observed prototype behavior; field deployment remains the outstanding validation step.
Technical notes4 sections
- Demo Environment
-
The AquaSense 2 Ultra was demonstrated in a tank approximating a small in-ground pool structure at the Beatbot CES 2026 booth. The controlled environment used clear water with a submerged obstacle prop. Algae, leaf debris, and turbid water conditions were not part of the demonstration setup.
- Observed Behavior
-
The robot completed a floor pass, transitioned to wall climbing, moved along the waterline, and entered surface skim mode in sequence. Transition points were smooth in the demo run; transition trigger logic (time-based, sensor-triggered, or programmatic) was not disclosed by Beatbot staff at the booth.
- Obstacle Avoidance
-
The camera system detected a submerged prop and navigated around it during the floor cleaning phase. Recovery path after avoidance was a wide arc; no details were given on how the system classifies objects or how it behaves when obstacle density increases.
- Clarification Module
-
The water clarification function was not directly demonstrated in the open tank setup. Beatbot representatives referenced it as an onboard passive system active during pool sessions; no performance metrics or filter output data were shown.
SourcesCNET CES 2026 coverage 2026-01-11TechRadar CES 2026 hands-on roundup 2026-01-12 - 2025
-
Beatbot teases AquaSense 2 Ultra spec sheet ahead of CES 2026 debut
Beatbot unveiled the AquaSense 2 Ultra at CES 2025 (January 2025), disclosing the 5-in-1 function list, cordless architecture, and battery specifications as the product's core differentiators.
Full assessment
AutonomyL3 capabilities announcedReadinessPromising progress strengthenedScoreScores unchangedThe announcement confirmed the robot as a distinct model from earlier AquaSense variants rather than a regional or cosmetic revision. The AquaSense 2 Series entered commercial availability on February 10, 2025, at disclosed MSRPs.
Impact on autonomy
- Five cleaning functions listed as integrated in single autonomous session
- Cordless architecture confirmed prior to formal reveal
- Camera-based navigation referenced without specification detail
Impact on readiness
- Specifications published provide first confirmed technical floor for evaluation
- No shipping date or pricing disclosed in pre-announcement materials
- Pre-release classification sustained; no consumer availability evidence
Claim check4 claims reviewed
Industry-first 5-in-1 cordless pool robotMulti-function integration is novel in cordless form; prior corded pool robots addressed multiple surfaces. The cordless 5-in-1 combination lacks a direct prior-generation equivalent in the consumer segment.15.4 lb unit weight designed for easy in-pool handlingWeight figure appears in pre-announcement spec sheet; physical handling ease is user-dependent and not independently assessed148 Wh battery supports 180-minute session runtimeBattery capacity and runtime listed in preliminary specs; runtime under mixed-mode operation across all five functions not validatedWater clarification integrated without separate hardwareClarification described as onboard; filter media and replacement cadence details not included in pre-announcement materialsBottom lineThe CES 2025 specification disclosure is consistent with the product entering commercial availability in February 2025; the core unknowns are performance under load and long-term consumable economics.
Technical notes3 sections
- Pre-Announcement Specification Disclosure
-
Beatbot’s pre-CES materials listed the AquaSense 2 Ultra’s battery at 148 Wh with a 180-minute runtime claim. Dimensions given as 17.3 x 17.3 x 9.4 inches; weight 15.4 lb. These figures position it as a mid-to-high weight class among cordless pool robots, consistent with the battery capacity required for extended multi-surface sessions.
- Model Differentiation
-
The AquaSense 2 Ultra is listed in Beatbot materials as a distinct product, not a variant or regional designation of the AquaSense Pro or AquaSense 2 Pro. The five-function integration and cordless architecture differentiate it from earlier models in function count and infrastructure requirements.
- Outstanding Details
-
at AnnouncementCES 2025 materials did not include dock specifications, water clarification filter type, or regional release sequencing detail. Wi-Fi connectivity was noted without protocol details. The camera navigation system was referenced in product copy but not specified technically in announcement materials.
SourcesBeatbot product announcement materials 2025-12-18Pool and Spa News 2025-12-20