Skip to content
Saved
Comparison · 2 robots

Dreame X30 Ultra · Ecovacs Deebot T30 Pro Omni

All robot vacuums. Every measure below is plotted against the full class, so a difference can be read against how much the class itself varies.

  1. Dreame X30 Ultra
  2. Ecovacs Deebot T30 Pro Omni

Up to three

01 Classification

What each one does on its own.

The Autonomy Ladder is the same five rungs for every robot on the site. A rung describes the conditions a robot handles without you, not how good it is.

V
Generalized
Any task, any setting
IV
Environmental
Handles new obstacles without help
III
Conditional
Finishes familiar jobs on its own
Dreame X30 UltraEcovacs Deebot T30 Pro Omni
II
Assisted
Runs preset routines, needs rescue
I
Manual
One action, on command
02 Assessment

Where they actually differ.

The Robovations Score is nine inputs across three pillars, each weighted as shown and each scored so that more is better. A robot can lead on one and trail on another, which is the point of showing them apart. Cost of ownership and data handling are reported on each robot's own page and are never averaged into the score.

Capability

Task completion16% of score
Does it finish the job it is sold to do, unattended
  • Dreame X30 Ultra90
  • Ecovacs Deebot T30 Pro Omni72
18median 72 across 433 scored robots100
Coverage and navigation10% of score
Does it work the whole area, and hold that between runs
  • Dreame X30 Ultra82
  • Ecovacs Deebot T30 Pro Omni75
0median 70 across 421 scored robots100
Edge-case recovery10% of score
Does it recover from the failures its category presents
  • Dreame X30 Ultra58
  • Ecovacs Deebot T30 Pro Omni40
18median 52 across 320 scored robots100
Operating envelope4% of score
How far conditions can vary before performance drops
  • Dreame X30 Ultra82
  • Ecovacs Deebot T30 Pro Omni75
28median 68 across 397 scored robots100

Dependability

Field failure rate16% of score
Documented hardware failures per owner-year
  • Dreame X30 Ultra85
  • Ecovacs Deebot T30 Pro Omni80
6median 70 across 359 scored robots100
Software stability14% of score
Whether updates fix more than they break
  • Dreame X30 Ultra77
  • Ecovacs Deebot T30 Pro Omni82
15median 65 across 342 scored robots100
Support longevity10% of score
Committed parts, service and updates, with dates
  • Dreame X30 Ultra76
  • Ecovacs Deebot T30 Pro Omni73
0median 62 across 429 scored robots100

Ownership burden

Routine maintenance12% of score
Hands-on time it asks for in normal operation
  • Dreame X30 Ultra100
  • Ecovacs Deebot T30 Pro Omni94
22median 67 across 434 scored robots100
Consumables8% of score
Parts that must be bought to keep it working
  • Dreame X30 Ultra61
  • Ecovacs Deebot T30 Pro Omni57
8median 69 across 434 scored robots100
03 Measured against the class

How far apart is a long way?

A number only means something next to the spread it sits in. Each track below is the real range across every classified robot in the class, with the median marked.

Price217 with a published figure
  • Dreame X30 Ultra$899.99
  • Ecovacs Deebot T30 Pro Omni$999
$160median $799.99$2,599
Suction (mode not stated)210 with a published figure
  • Dreame X30 Ultra8,300 Pa
  • Ecovacs Deebot T30 Pro Omni11,000 Pa
1,000 Pamedian 10,000 Pa42,000 Pa
Runtime187 with a published figure
  • Dreame X30 Ultra180 min
  • Ecovacs Deebot T30 Pro Omni290 min
60 minmedian 180 min360 min
Charge time165 with a published figure
  • Dreame X30 Ultra420 min
  • Ecovacs Deebot T30 Pro Omni186 min
90 minmedian 240 min420 min
Noise156 with a published figure
  • Dreame X30 Ultra66 dB
  • Ecovacs Deebot T30 Pro Omni65 dB
43 dBmedian 67 dB80 dB
Weight184 with a published figure
  • Dreame X30 Ultra9.5 lbs
  • Ecovacs Deebot T30 Pro Omni9 lbs
3.6 lbsmedian 8.4 lbs25 lbs
Height226 with a published figure
  • Dreame X30 Ultra3.8 in
  • Ecovacs Deebot T30 Pro Omni4.1 in
2.6 inmedian 3.8 in7.8 in
04 Ownership

What the numbers leave out.

The trade-off

What each design gives up to be good at what it is good at.

Dreame X30 Ultra

MopExtend improves edge and corner coverage on the robot’s own detection, and the reach it adds is 4 cm, not a room’s worth. It is a mount that swings within the machine’s footprint, not an arm that extends past it.

Automatic pad detach and in-place washing remove the weekly mop chore. The price is a base station 23.2 inches tall on a 13.4 by 18 inch footprint that has to stay put beside an outlet.

Ecovacs Deebot T30 Pro Omni

The dock eliminates manual mop rinsing, but introduces a 20-30 minute wash-and-dry cycle that conflicts with quiet household hours.

Ecovacs publishes up to 290 minutes in silent mode on hard floor, but that is a best case; raising suction toward the 11,000 Pa maximum shortens a charge substantially, and no runtime at that setting is published.

The automated dock adds convenience but brings its own upkeep, mop pads, dust bags and tank refills, that a budget vacuum does not carry.

Who each one is wrong for

Stated by the record itself. A robot being wrong for a household is a fact about fit, not a fault.

Dreame X30 Ultra
Homes above roughly 2,600 sq ft of continuous floor
Dreame states 243 m2, about 2,615 sq ft, on a single charge. Larger continuous layouts mean the robot recharges partway through and resumes, which lengthens the job rather than stopping it.
Owners wanting minimal dock footprint
The base station measures 13.4 by 18 inches on the floor and stands 23.2 inches tall, so it needs a permanent position against a wall beside an outlet rather than a cabinet slot.
Wi-Fi 5 GHz-only networks or band-locked systems
2.4 GHz is required to provision the robot and reach it from the app; without it there is no pairing, no scheduling and no multi-floor map management. The mechanical behaviors, MopExtend and the carpet pad handling, run on onboard detection and are unaffected by connectivity.
Budget-focused buyers
Street pricing $799-999 seats X30 Ultra in mid-to-premium range. Older Dreame models (L10s Ultra) deliver sealed-floor capability at $549-699 with lower arm-maintenance overhead.
Owners expecting a reaching arm
MopExtend is a mop mount that swings out 4 cm (1.57 in) within the robot's own footprint on edge detection. It does not extend into spaces the robot cannot drive to, and it plays no part in carpet coverage.
Ecovacs Deebot T30 Pro Omni
Buyers who will not accept a networked camera in the home
The robot carries a camera and depends on the Ecovacs cloud, and no fully local mode is documented. Ecovacs has a documented security incident history across the Deebot line, including a 2024 DEF CON demonstration of Bluetooth takeover and a subsequent CISA advisory covering Deebot vacuums and base stations.
Homes requiring silent daytime operation
Dock wash cycles run 20-30 minutes at 60-70 dB after mop sessions. Owner reports note scheduling conflicts in work-from-home environments.
Buyers requiring offline or local-only operation
All advanced features depend on Ecovacs cloud servers. No documented local-only scheduling or mapping mode. Cloud connectivity is required for routine operation.
Single-floor homes exceeding 3,000 sq ft
Ecovacs publishes up to 290 minutes in silent mode on hard floor, which is a best case; higher suction modes draw that down, so very large floors take a mid-session recharge and a longer total elapsed time.

What stays your job

The upkeep ownership hands back to you, whatever the autonomy level says.

Dreame X30 Ultra
  • After every run: Handled by the station, which washes the mop pads in place with 60 C water and dries them with hot air; pads come off and go back on without owner involvement.
  • Every 3-4 weeks in typical use: Refill the 4.5 L clean water tank with ordinary tap water and empty the waste tank. The station dispenses Dreame’s own cleaning solution into the clean water.
  • Weekly: Wipe the station’s docking contacts and the robot’s sensor windows; clear hair from the main brush and side brush.
  • Every 3 months: Replace the auto-empty dust bag (~$15-20 per bag; expected lifespan 8-12 weeks in typical use).
  • Every 6 months: Replace main brush and side brush (~$30-40 per set), or as wear becomes visible.
  • As pads lose absorbency: Replace the mop pads. In-place washing extends their life but does not remove wear.
Ecovacs Deebot T30 Pro Omni
  • Weekly: Empty dustbin and mop water tank; refill clean water tank ($0).
  • Monthly: Swap mop pads; clean dock water filter ($15-25 per pair pads).
  • Monthly: Rinse vacuum dustbin filter; replace when clogged ($0).
  • Every 3-6 months: Replace vacuum motor filter and side brush ($20-40 total per Ecovacs pricing).
  • Every 3-6 months: Clean LiDAR window and camera lenses; inspect cliff sensors for dust accumulation ($0).
  • Annually: Inspect dock brush and replace if bristles are flattened; clean dock jets ($0 unless replacement brush ordered).
05 Evidence

How much each of these is standing on.

Classifications rest on different depths of evidence. A pre-release assessment and a verified one are not the same kind of claim.

Evidence behind each classification
Robot Evidence status Sources reviewed Last assessed
Dreame X30 Ultra Provisional 4 Sep 2026
Ecovacs Deebot T30 Pro Omni Provisional 7 Aug 2026

Robovations classifies robots; it does not rank them. Nothing on this page is a recommendation, and no manufacturer influences a classification or its placement here.