Skip to content
Robovations
Robovations™
Robot Autonomy, Classified
Saved

ComparisonMaytronics Dolphin Liberty 300 and Aiper Scuba V3

Up to three

All robot pool cleaners. Every figure below is placed against the whole class, so a gap can be read against how much the class itself varies.

Where each one suits you.

The conditions each robot was assessed against, side by side. Rows marked in gold are where these machines genuinely differ.

Fit verdicts by condition for each robot
Condition Dolphin Liberty 300 Aiper Scuba V3
Pool type
In-groundthey differ GoodMagnetic dock and climbing capability optimized for standard in-ground installations. DependsWorks for in-ground pools under 1,500 sq ft; larger pools require multiple charge cycles per week.
Above-groundthey differ PoorCordless form factor and dock design not suited to above-ground frame geometries. GoodOptimal for above-ground pools where dock placement on deck edges is straightforward.
Mixed setup GoodStandard cordless pool cleaner fit for any standard pool type. GoodDock adapter options support both pool types; placement flexibility is the main consideration.
Pool size
Small (< 400 sqft) GoodBelow documented range; cordless design and dock footprint may exceed needs for pools under 8,000 gallons. Good90-minute runtime covers pools under 1,400 sq ft in a single cycle without mid-session recharge.
Medium (400 – 800)they differ GoodManufacturer-targeted range of 12,000-20,000 gallons; runtime and coverage align with medium pool cycle expectations. Depends1,400-2,500 sq ft pools require two charge cycles per week; manageable but adds routine friction.
Large (> 800)they differ DependsPools above 25,000 gallons may require multiple charge cycles per pass; heavy debris load shortens cartridge intervals. PoorPools over 2,500 sq ft leave significant coverage gaps; multiple daily cycles become impractical.
Debris load
Fine (sand / silt) GoodFilter-cartridge design handles fine sediment; weekly rinse maintains suction for sand and silt. GoodDual cartridges handle fine debris efficiently; no clogging reported in typical sediment loads.
Leaves / large debris DependsCartridge clogging accelerates with heavy leaf fall; pre-skimming recommended during peak shedding season. DependsTree-adjacent pools require cartridge cleaning after 2-3 cycles; owners report filter clogging with heavy leaf fall.
Algae / heavy fouling DependsCleaner removes settled algae; active algae blooms require chemical treatment. Cartridge washings increase with algae frequency. DependsOscillating brushes suppress algae growth on floor and lower walls; waterline algae requires manual treatment.
Coverage you want
Floor only GoodPrimary documented function with predictable floor coverage per cycle. GoodDedicated floor coverage with 90-minute run time; no wall or waterline reach above brush mechanism.
Floor + wallsthey differ GoodWall-climbing capability documented; sustained waterline reach varies by pool condition and cleaner pitch. DependsReaches lower walls below waterline; upper walls and waterline require separate skimmer or manual cleaning.
Floor + walls + waterlinethey differ DependsWaterline brush reach documented but performance on calcium buildup and algae line varies; depends on pool chemistry. PoorDoes not reach waterline or wall climb above brush line; full-pool coverage is not achievable with this model.

A robot being poor for a condition is a fact about fit, not a fault. “Depends” means the record names a limit worth reading, not that the answer is unknown.

Keep going.

The full recordMaytronics Dolphin Liberty 300Specifications, evidence, the Fit Check in full, and every tracked change.The full recordAiper Scuba V3Specifications, evidence, the Fit Check in full, and every tracked change.

Robovations classifies robots; it does not rank them. Nothing on this page is a recommendation, and no manufacturer influences a classification or its placement here.